English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
الفولاذ المقاوم للصدأ تدفق رقمي نظيفة مقعد
An all-stainless clean bench with welded, radiused work-zone surfaces for facilities that use frequent disinfectant wiping and require durable corrosion-resistant construction.
- All-Stainless Construction
- Welded Radiused Work Zone
- Chemical-Resistant Surfaces
- Tool-Free Work Tray Removal
مقدمة المنتج
This clean bench replaces coated exterior and work-zone panels with formed SUS304 or optional SUS316L stainless steel. The inner liner uses welded corners and a removable work tray to reduce exposed joints during cleaning. Stainless service covers protect the fan, filter and electrical sections while remaining removable from the non-critical side. The airflow layout can be vertical or horizontal, but the defining feature is the corrosion-resistant, low-shedding cabinet construction.
الخصائص الرئيسية
Welded radiused inner corners eliminate open overlaps in the active work zone.
A lift-out work tray allows the spill pan and lower surfaces to be cleaned separately.
Flush stainless fasteners reduce protrusions around frequently wiped surfaces.
Rear or top service covers keep routine maintenance outside the working face.
مخاوف المنتج للعملاء
Frequent chemical wiping and long service life demand surfaces that resist coating damage and expose few dirt-trapping joints.
Painted panels chip after repeated equipment contact.Stainless outer and inner panels remove a vulnerable paint layer from the cabinet.
Residue remains in folded interior corners.Continuously welded radiused corners provide accessible wipe-down geometry.
Liquid reaches inaccessible space beneath the work surface.Tool-free removable work sections expose the stainless lower pan.
Service screws protrude into the clean zone.Flush fasteners and external service access keep most hardware away from the work area.
تطبيقات نموذجية
Pharmaceutical preparation supportMedical-device clean assemblyBiotechnology media handling with non-hazardous materialsFrequent-disinfection laboratory work
المعلمات الفنية
Typical configurable construction ranges for an all-stainless laminar flow clean bench are listed below.
| المواد الأساسية | SUS304 stainless steel enclosure, work-zone liner, plenum skins and removable work tray |
|---|---|
| سمك اللوحة | 20-35 mm double-skin stainless cabinet sections |
| العرض الفعال | 900-1800 mm clear working width |
| الحد الأقصى الطول | Up to 2200 mm overall cabinet height |
| الصلب يواجه سمك | 1.0-1.5 mm SUS304 or SUS316L |
| الكثافة الأساسية | Approximately 7900 kg/m³ for the stainless structural skins |
| الموصلية الحرارية | 14-16 W/(m·K) for SUS304 stainless steel |
| إنهاء السطح | Brushed No. 4 or electropolished stainless steel with welded radiused inner corners |
| نوع المشترك | Continuously welded work-zone seams with gasketed filter and removable service covers |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
SUS304 or SUS316L constructionVertical or horizontal airflowElectropolished work zonePerforated or solid removable work tray
Planning a Stainless Steel Laminar Flow Clean Bench specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
