All-stainless laminar flow clean bench in complete three-quarter view

Laminar Flow ve Containment Equipment

Paslanmaz Çelik Laminar Flow Temiz Bench

An all-stainless clean bench with welded, radiused work-zone surfaces for facilities that use frequent disinfectant wiping and require durable corrosion-resistant construction.

All-Stainless Construction
Welded Radiused Work Zone
Chemical-Resistant Surfaces
Tool-Free Work Tray Removal

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This clean bench replaces coated exterior and work-zone panels with formed SUS304 or optional SUS316L stainless steel. The inner liner uses welded corners and a removable work tray to reduce exposed joints during cleaning. Stainless service covers protect the fan, filter and electrical sections while remaining removable from the non-critical side. The airflow layout can be vertical or horizontal, but the defining feature is the corrosion-resistant, low-shedding cabinet construction.

Ana Özellikler

Formed stainless external panels resist chipping associated with painted finishes.

Welded radiused inner corners eliminate open overlaps in the active work zone.

A lift-out work tray allows the spill pan and lower surfaces to be cleaned separately.

Flush stainless fasteners reduce protrusions around frequently wiped surfaces.

Rear or top service covers keep routine maintenance outside the working face.

Müşteri Ürün Sorunları

Frequent chemical wiping and long service life demand surfaces that resist coating damage and expose few dirt-trapping joints.

Painted panels chip after repeated equipment contact.Stainless outer and inner panels remove a vulnerable paint layer from the cabinet.

Residue remains in folded interior corners.Continuously welded radiused corners provide accessible wipe-down geometry.

Liquid reaches inaccessible space beneath the work surface.Tool-free removable work sections expose the stainless lower pan.

Service screws protrude into the clean zone.Flush fasteners and external service access keep most hardware away from the work area.

Tipik uygulamalar

Pharmaceutical preparation supportMedical-device clean assemblyBiotechnology media handling with non-hazardous materialsFrequent-disinfection laboratory work

Teknik parametreler

Typical configurable construction ranges for an all-stainless laminar flow clean bench are listed below.

Temel malzemeler	SUS304 stainless steel enclosure, work-zone liner, plenum skins and removable work tray
Panel kalınlığı	20-35 mm double-skin stainless cabinet sections
Effective Width (Etkili Genişlik)	900-1800 mm clear working width
Maksimum uzunluk	Up to 2200 mm overall cabinet height
Çelik yüz yüze kalınlığı	1.0-1.5 mm SUS304 or SUS316L
Core Density (Çekirdek Yoğunluğu)	Approximately 7900 kg/m³ for the stainless structural skins
Termal İletkenlik	14-16 W/(m·K) for SUS304 stainless steel
Yüzey bitirme	Brushed No. 4 or electropolished stainless steel with welded radiused inner corners
Ortak tip	Continuously welded work-zone seams with gasketed filter and removable service covers
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

SUS304 or SUS316L constructionVertical or horizontal airflowElectropolished work zonePerforated or solid removable work tray

Planning a Stainless Steel Laminar Flow Clean Bench specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun