English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
مرشح الهواء الصلب مربع
A rigid deep-pleat filter that packages a large glass-fiber media area inside a gasketed galvanized box for stable operation under variable airflow.
- Rigid Box Construction
- Deep-Pleat Media Pack
- Stable Variable-Airflow Service
- Gasketed Header Seal
مقدمة المنتج
The rigid box air filter encloses a medium-efficiency deep-pleated glass-fiber pack inside a galvanized steel frame with a single header or box flange. Aluminum or hot-melt separators hold adjacent pleats apart so airflow reaches the full media depth. Polyurethane sealant fixes the pack to the frame and closes the perimeter against bypass, while a neoprene or polyurethane gasket seals the header to the filter bank. The rigid construction remains stable in air handlers where flexible pockets may move or collapse during rapid airflow changes.
الخصائص الرئيسية
Separators preserve uniform channels and stop adjacent pleat faces from touching.
A galvanized frame resists distortion during front loading and variable-air-volume operation.
Perimeter sealant and a replaceable header gasket create two distinct barriers against bypass.
مخاوف المنتج للعملاء
A rigid box filter must keep its media channels open and seal both the internal pack and the external mounting interface.
Flexible filters collapse or flap when airflow changes rapidly.A fixed box frame and supported pleat pack maintain geometry across the operating range.
Deep pleats touch and block airflow through the center of the media pack.Aluminum or hot-melt separators create consistent channels from the upstream to downstream face.
Air bypasses between the pleated pack and the inside wall of the box.Continuous polyurethane sealant bonds the pack perimeter to the galvanized frame.
The filter header leaks against an uneven bank frame after repeated changes.A resilient replaceable gasket compresses around the entire mounting flange.
تطبيقات نموذجية
Built-up air-handler filter banksCleanroom preparatory filtrationHospital and pharmaceutical HVACVariable-air-volume systemsPrefiltration before terminal HEPA stages
المعلمات الفنية
Typical construction ranges for a rigid medium-efficiency deep-pleat box air filter are listed below.
| المواد الأساسية | Deep-pleated microglass media with aluminum or hot-melt separators |
|---|---|
| سمك اللوحة | 150 or 292 mm nominal box depth |
| العرض الفعال | 305-610 mm modular face width |
| الحد الأقصى الطول | Up to 610 mm modular face length |
| الصلب يواجه سمك | 0.70-1.00 mm galvanized box frame and header flange |
| الكثافة الأساسية | Approximately 60-110 kg/m³ nominal assembled media-pack density |
| الموصلية الحرارية | Approximately 0.035-0.045 W/(m·K) for the dry microglass media |
| إنهاء السطح | Mill-galvanized steel box with white media and aluminum or polymer separators |
| نوع المشترك | Pleated pack polyurethane-sealed into a rigid box with single-header or gasketed flange connection |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
MERV 11 to MERV 15 grades150 mm or 292 mm depthAluminum- or hot-melt-separated mediaSingle header, double header or box-style frame
Planning a Rigid Box Air Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
