Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Filtro de aire de caja rígida por
A rigid deep-pleat filter that packages a large glass-fiber media area inside a gasketed galvanized box for stable operation under variable airflow.
- Rigid Box Construction
- Deep-Pleat Media Pack
- Stable Variable-Airflow Service
- Gasketed Header Seal
Introducción del producto
The rigid box air filter encloses a medium-efficiency deep-pleated glass-fiber pack inside a galvanized steel frame with a single header or box flange. Aluminum or hot-melt separators hold adjacent pleats apart so airflow reaches the full media depth. Polyurethane sealant fixes the pack to the frame and closes the perimeter against bypass, while a neoprene or polyurethane gasket seals the header to the filter bank. The rigid construction remains stable in air handlers where flexible pockets may move or collapse during rapid airflow changes.
Características clave
Separators preserve uniform channels and stop adjacent pleat faces from touching.
A galvanized frame resists distortion during front loading and variable-air-volume operation.
Perimeter sealant and a replaceable header gasket create two distinct barriers against bypass.
Preocupaciones del producto del cliente
A rigid box filter must keep its media channels open and seal both the internal pack and the external mounting interface.
Flexible filters collapse or flap when airflow changes rapidly.A fixed box frame and supported pleat pack maintain geometry across the operating range.
Deep pleats touch and block airflow through the center of the media pack.Aluminum or hot-melt separators create consistent channels from the upstream to downstream face.
Air bypasses between the pleated pack and the inside wall of the box.Continuous polyurethane sealant bonds the pack perimeter to the galvanized frame.
The filter header leaks against an uneven bank frame after repeated changes.A resilient replaceable gasket compresses around the entire mounting flange.
Aplicaciones típicas
Built-up air-handler filter banksCleanroom preparatory filtrationHospital and pharmaceutical HVACVariable-air-volume systemsPrefiltration before terminal HEPA stages
Parámetros técnicos
Typical construction ranges for a rigid medium-efficiency deep-pleat box air filter are listed below.
| Materiales Core | Deep-pleated microglass media with aluminum or hot-melt separators |
|---|---|
| Panel de espesor | 150 or 292 mm nominal box depth |
| Ancho efectivo | 305-610 mm modular face width |
| Longitud máxima | Up to 610 mm modular face length |
| Acero frente a espesor | 0.70-1.00 mm galvanized box frame and header flange |
| Densidad Core | Approximately 60-110 kg/m³ nominal assembled media-pack density |
| Conductividad térmica | Approximately 0.035-0.045 W/(m·K) for the dry microglass media |
| Superficie acabada | Mill-galvanized steel box with white media and aluminum or polymer separators |
| Tipo conjunto | Pleated pack polyurethane-sealed into a rigid box with single-header or gasketed flange connection |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
MERV 11 to MERV 15 grades150 mm or 292 mm depthAluminum- or hot-melt-separated mediaSingle header, double header or box-style frame
Planning a Rigid Box Air Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
