English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
مبردة المرور مربع
A wall-mounted interlocked transfer chamber with stainless interior, active refrigeration and digital temperature monitoring for sensitive materials.
- Monitored Chamber Cooling
- Opposing Interlocked Doors
- Stainless Transfer Interior
- Flush Cleanroom Frames
مقدمة المنتج
The refrigerated pass box combines a thermally insulated stainless transfer chamber with opposing interlocked doors and a dedicated cooling module. It allows temperature-sensitive samples or supplies to cross a controlled wall without personnel movement while reducing simultaneous door opening. A digital controller displays chamber temperature, and sealed internal corners, removable shelving and accessible condensate management support routine cleaning.
الخصائص الرئيسية
Electromagnetic door interlocks discourage both doors from opening at the same time.
Flush wall frames, gasketed doors and radiused internal corners simplify cleaning around the opening.
A digital controller provides local temperature display and configurable alarm contacts.
مخاوف المنتج للعملاء
Ordinary pass boxes do not protect materials that must remain cool while waiting for receiving staff on the opposite side.
Sensitive material warms while staged inside a conventional transfer hatch.Active refrigeration and insulated panels reduce temperature rise during controlled transfer.
Opening both doors can disturb room segregation.Opposing electromagnetic interlocks permit one controlled side to open at a time.
Condensation and shelf joints complicate chamber cleaning.A stainless radiused liner, removable shelves and managed condensate path provide accessible surfaces.
Operators cannot readily confirm internal temperature before retrieval.A front digital controller displays measured chamber temperature and supports alarm output.
تطبيقات نموذجية
Cold-chain sample transfer between laboratoriesTemperature-sensitive material movement into cleanroomsPharmacy compounding and clinical support areasBiotechnology media and reagent transfer
المعلمات الفنية
Typical configurable construction values for a cleanroom refrigerated pass box are listed below; operating set point depends on load and room conditions.
| المواد الأساسية | 304 stainless interior with polyurethane insulation, gasketed doors and integrated refrigeration module |
|---|---|
| سمك اللوحة | 50-100 mm insulated chamber and door construction |
| العرض الفعال | 500-900 mm clear transfer opening |
| الحد الأقصى الطول | Up to 1500 mm overall chamber depth including service module |
| الصلب يواجه سمك | 1.0-1.5 mm stainless interior and cleanroom-side facing |
| الكثافة الأساسية | 38-45 kg/m³ closed-cell polyurethane insulation |
| الموصلية الحرارية | 0.022-0.026 W/(m·K) for polyurethane insulation |
| إنهاء السطح | Satin stainless chamber with radiused corners, flush frames and cleanable gasket profiles |
| نوع المشترك | Sealed insulated shell with welded stainless liner, gasketed opposing doors and electromagnetic interlock |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Nominal 2-8 °C or application-selected cool set pointSolid stainless or glazed door windowsSingle or multiple removable shelvesRemote temperature alarm and data output
Planning a Refrigerated Pass Box specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
