English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
Lux متر
A professional handheld lux meter with a cabled cosine-corrected light sensor for evaluating illuminance at cleanroom work surfaces and facility lighting points.
- Separate cosine-corrected light sensor.
- Timed hold for shadow-free readings.
- Tripod-ready measurement head.
مقدمة المنتج
This portable illuminance meter separates the display from the light-receiving head so the sensor can be positioned at the actual measurement plane without the operator shading or reflecting light onto it. A silicon photodiode beneath a white diffuser responds to visible light, while optical filtering and cosine correction help the detector represent how illuminance reaches a flat surface from different directions. The handheld unit provides automatic or manual range selection, hold and timed-hold operation, maximum and minimum recall, point averaging and reading storage for structured lighting surveys.
الخصائص الرئيسية
Cosine-corrected white diffuser supports representative readings from oblique incident light.
Visible-response optical filtering suits common fluorescent, LED and daylight measurements.
Automatic and manual ranges cover low-level emergency lighting and bright task-lighting checks.
Timed hold reduces the influence of an operator's shadow or clothing reflection at the sensor.
Threaded sensor mount and compact tripod maintain a repeatable height and orientation during grid surveys.
مخاوف المنتج للعملاء
Reliable illuminance surveys depend on sensor angle, measurement height, source spectrum and the operator's position, so the detector must be placed consistently without disturbing the light field.
The technician's body can cast a shadow or reflect light toward the detector and change the reading.The cabled sensor and timed-hold mode let the operator step away before the value is captured.
A detector tilted away from the defined work plane can make grid measurements difficult to compare.The flat sensor base and 1/4-inch tripod mount hold the diffuser level at a repeatable height.
LED, fluorescent and daylight sources have different spectral distributions.A silicon photodiode and visible-response correction filter provide a measurement response aligned with photopic illuminance.
Single readings do not show whether lighting is uniform across a room or workbench.Point averaging and stored readings support a repeatable measurement grid and later comparison.
تطبيقات نموذجية
Cleanroom work-plane illuminance surveysInspection bench and task-light verificationLaboratory lighting uniformity mappingEmergency and escape-route lighting checksFacility LED retrofit acceptance measurements
المعلمات الفنية
Representative professional lux-meter construction is listed below; measuring range, data interface, extension cable and sensor support can be selected for the lighting survey method.
| المواد الأساسية | ABS/PC handheld housing with TPE grip zones, silicon photodiode, optical correction filter, white polymer diffuser and copper signal cable |
|---|---|
| سمك اللوحة | Typically 2.0-3.0 mm for the molded handheld enclosure wall |
| العرض الفعال | Approximately 60-78 mm across the handheld indicator |
| الحد الأقصى الطول | Approximately 149-170 mm for the indicator and 120-135 mm for the separate sensor body |
| الصلب يواجه سمك | Typically 0.8-1.2 mm for stainless fasteners, internal shield and tripod threaded insert |
| الكثافة الأساسية | Approximately 1100-1200 kg/m³ for the ABS/PC enclosure blend |
| الموصلية الحرارية | Approximately 0.19-0.22 W/(m·K) for the ABS/PC enclosure blend |
| إنهاء السطح | Dark-gray fine-texture housing, cyan-blue TPE grips, clear LCD window and matte white cosine diffuser |
| نوع المشترك | Keyed sensor-cable connectors with strain relief, removable diffuser cap and 1/4-inch threaded tripod insert |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Low-light resolution rangeHigh-range sensor up to 200000 lxDetachable sensor extension cableMini tripod for sensor positioningUSB data-transfer interfaceProtective carrying case
Planning a Lux Meter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
