English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ESD والمنتجات المضادة للساكنة
I فوهة الهواء المؤين
The Ionizing Air Nozzle is a compact fixed-position device that combines balanced ion generation with clean compressed air for localized static neutralization and particle removal.
- Focused ionized-air outlet neutralizes charge in narrow spaces and localized machine processes.
- Compact cylindrical housing and pivoting foot simplify integration near the target.
- Separate pneumatic and locking electrical connections keep air and power routing clear and serviceable.
مقدمة المنتج
This nozzle integrates a silver-anodized cylindrical housing, blue front collar and tapered stainless outlet into a rigid point-of-use assembly. A recessed emitter at the outlet ionizes clean dry air or nitrogen before it reaches the target. The green status lamp confirms operation, while the pivot-mounted L-foot permits stable installation and aiming. A blue pneumatic tube and separate black electrical lead terminate in distinct fittings so plant air and controller power can be connected and serviced independently.
الخصائص الرئيسية
Tapered stainless outlet provides a durable, cleanable flow path.
Compact round housing fits inside tools, guards and narrow process openings.
Green status lamp gives a direct visual operating indication.
Pivoting L-bracket supports controlled aim and two-hole machine mounting.
Separate air and electrical connectors prevent connection ambiguity during service.
Alternative outlet tips can adapt the pattern for focused, wide or extended reach.
مخاوف المنتج للعملاء
Localized charge and contamination can persist inside small process spaces where a blower cannot be positioned and handheld cleaning is not repeatable.
A broad ionizer cannot reach a narrow cavity or fixture pocket.The tapered point-of-use outlet directs ionized air precisely toward the target.
Handheld blow-off introduces variation in distance and angle.The rigid pivot bracket locks the nozzle into a repeatable machine position.
Ordinary compressed air can add charge while removing particles.The recessed emitter neutralizes the delivered air stream before it reaches the surface.
Air and electrical connections are confused during maintenance.Distinct blue pneumatic tubing and black locking electrical cable make each route immediately identifiable.
Operators cannot see whether a fixed nozzle is energized.The housing-mounted green lamp provides local status feedback.
تطبيقات نموذجية
Component cleaning inside automated equipment.Electronics assembly and test fixtures.Optical, sensor and medical-device preparation.Packaging-film and label separation points.Small conveyor transfer and pick-and-place zones.Cleanroom glovebox and laminar-flow work areas.
المعلمات الفنية
The representative configuration below is designed for clean dry air or nitrogen supplied to a fixed point of use. Outlet pattern, bracket, tube size, electrical interface, controller voltage, flow sensing and filtration can be tailored to the installation.
| المواد الأساسية | Silver-anodized aluminum housing with stainless-steel outlet, alloy emitter point and polymer line fittings |
|---|---|
| سمك اللوحة | 1.5–2.5 mm cylindrical housing-wall thickness |
| العرض الفعال | 20–100 mm focused ionized-air coverage width at normal working distance |
| الحد الأقصى الطول | Up to 180 mm overall nozzle-body length with standard outlet |
| الصلب يواجه سمك | 1.0–1.5 mm stainless-steel outlet-wall thickness |
| الكثافة الأساسية | 2650–2750 kg/m³ aluminum-housing density |
| الموصلية الحرارية | 160–205 W/(m·K) for the aluminum housing alloy |
| إنهاء السطح | Clear silver and blue anodized housing with brushed-stainless outlet and matte black mounting foot |
| نوع المشترك | Pivot-mounted cylindrical nozzle with rear push-in air fitting and separate locking electrical connector |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Standard, wide-angle, long-range, flexible or manifold outlet tip.Clean dry air or nitrogen service.Alternative pneumatic tube sizes and fittings.24 VDC or remote-controller power interface.Photoelectric sensor or external trigger input.In-line point-of-use filter.Fixed, pivoting or flexible mounting system.
Planning a Ionizing Air Nozzle specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
