English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
محطة غسل وتطهير اليدين
A touchless stainless station that guides both hands through automated washing and disinfection cycles over an integrated drained basin.
- Paired Wash Openings
- Paired Disinfection Openings
- Touchless Sensor Cycles
- Integrated Drained Basin
مقدمة المنتج
The hand wash and disinfection station combines two sensor-controlled wash chambers and two separate sanitizer chambers in one stainless console. Internal nozzles meter water and soap during washing, followed by a controlled disinfectant dose. The wide basin captures runoff, while the central display and lower service cabinet provide cycle settings and access to pumps, reservoirs and plumbing.
الخصائص الرئيسية
Two separate disinfection openings reduce contact between wet and sanitized stages.
Touchless sensors start repeatable timed cycles without shared handles.
A deep sloped basin and concealed service cabinet simplify drainage and maintenance.
مخاوف المنتج للعملاء
Manual sinks do not ensure that both hands receive consistent washing and sanitizer contact before entry to a controlled area.
Operators may shorten manual wash time or miss surfaces.Programmed paired wash chambers deliver repeatable spray duration to both hands.
Touching taps after washing can recontaminate clean hands.Sensors initiate every stage without contact with controls or fittings.
Combining soap and sanitizer in one opening can cause dilution or carryover.Dedicated wash and disinfection openings physically separate the two processes.
Exposed tanks and pipes complicate wet-area cleaning.The two-door lower cabinet encloses dosing and utility components beneath the drained basin.
تطبيقات نموذجية
Food-production hygiene entrancesPharmaceutical changing roomsHealthcare support areasHigh-care packaging facilities
المعلمات الفنية
Typical configurable construction values for an automatic hand wash and disinfection station are listed below.
| المواد الأساسية | 304 stainless-steel console and basin with polymer hand-entry liners and sensor-controlled dosing |
|---|---|
| سمك اللوحة | 40-80 mm console and service-cabinet sections |
| العرض الفعال | 1200-1800 mm operator-facing station width |
| الحد الأقصى الطول | Up to 2100 mm overall station length |
| الصلب يواجه سمك | 1.2-2.0 mm stainless console and basin facing |
| الكثافة الأساسية | 7950-8050 kg/m³ for stainless-steel construction |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Brushed hygienic stainless with black hand-entry liners and smooth sloped basin |
| نوع المشترك | Welded drained basin with sealed sensor openings and gasketed two-door service cabinet |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Wash-only or wash-dry-disinfect sequencesHeated water packageAccess-control output after completed cycleAlternative reservoir and utility connections
Planning a Hand Wash and Disinfection Station specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
