Complete fixed VHP generator skid in three-quarter view

تنظيف الغرف النظيفة والتطهير والتعقيم

نظام إزالة التلوث الثابت VHP

Central fixed VHP decontamination system with dedicated distribution piping, room valves, catalytic aeration and BMS-integrated cycle control.

Central generator serves repeated room cycles
Dedicated pipework removes mobile setup
BMS interlocks coordinate rooms and HVAC

طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

The Fixed VHP Decontamination System places the generator and catalyst equipment in an unclassified technical space and routes vapor through dedicated stainless piping or the building air system. Actuated room valves select the target zone, while local HMI and BMS handshakes coordinate HVAC isolation, injection, dwell and aeration. Permanent ceiling diffusers and sensors improve repeatability for facilities that decontaminate the same rooms frequently.

الخصائص الرئيسية

Central equipment remains outside classified rooms.

Actuated valves select individual treatment zones.

Fixed diffusers avoid temporary hoses and cables.

BMS interlocks coordinate doors and ventilation.

Local HMI launches stored room-specific cycles.

Catalyst and HVAC routes support controlled aeration.

مخاوف المنتج للعملاء

The system addresses repeated equipment transfer, manual hose setup, inconsistent room isolation and decentralized cycle control.

Repeated setup laborPermanent pipework and diffusers eliminate routine mobile positioning.

Wrong room routingActuated valves and control logic select the qualified zone.

HVAC coordination errorsBMS handshakes enforce the required ventilation state.

Variable recurring cyclesStored room recipes reuse defined phase settings.

تطبيقات نموذجية

Sterile filling suitesBiopharmaceutical manufacturing coresMaterial airlocksContainment laboratoriesBiomedical holding areas

المعلمات الفنية

The specifications describe modular fixed installations located in a technical area and connected to one or more sealed target rooms.

المواد الأساسية	Stainless generator cabinet, distribution piping and room diffusers
سمك اللوحة	1.5 mm technical-cabinet panel thickness
العرض الفعال	800 mm nominal generator skid width
الحد الأقصى الطول	2400 mm nominal modular skid length
الصلب يواجه سمك	1.5 mm nominal Type 304 stainless facing
الكثافة الأساسية	7900 كغ / م3 كثافة الفولاذ المقاوم للصدأ الاسمية
الموصلية الحرارية	15 W/(m·K) nominal for stainless system structure
إنهاء السطح	Brushed stainless cabinets and electropolished distribution fittings
نوع المشترك	Sanitary-clamp distribution manifold with actuated room valves
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

الخيارات المتاحة

Single-room or multi-zone manifoldDedicated piping or HVAC distributionCeiling or wall catalyst modulesLocal and central HMI stationsSecure data historian interface

Planning a Fixed VHP Decontamination System specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا