English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة التحكم في الغرف النظيفة والمراقبة البيئية
مرشح استشعار الضغط التفاضلي
A differential sensor package that compares upstream and downstream filter pressure to track loading, blockage and unexpected bypass conditions.
- Upstream-Downstream Comparison
- Filter Loading Trend
- Adjustable Alarm Threshold
- Dual Pressure Tubing Kit
مقدمة المنتج
The filter differential pressure sensor receives one pressure line from each side of a HEPA filter, prefilter or air-handling coil. Its low-pressure element converts the difference into a continuous signal that rises as resistance builds at a given airflow. Monitoring systems can trend the value and generate a maintenance alarm before the filter causes excessive fan demand or airflow loss. Clearly separated high and low ports, colored tubing and serviceable zero adjustment reduce common installation errors.
الخصائص الرئيسية
Continuous output shows the rate of loading instead of only a single switch point.
Adjustable alarm and hysteresis support planned maintenance before severe restriction.
Colored pressure lines and labeled ports reduce upstream-downstream connection errors.
مخاوف المنتج للعملاء
Filter pressure drop depends on airflow as well as loading, so reliable interpretation requires correct pressure connections and trend context.
Maintenance changes filters on a fixed schedule without knowing actual loading.Continuous differential trends reveal how resistance develops under real operation.
Reversed pressure tubes produce a negative or misleading reading.Red-blue tubing and marked high-low ports preserve upstream-downstream orientation.
A brief fan-speed change triggers a false dirty-filter alarm.Delay and hysteresis prevent a short airflow transition from being treated as sustained loading.
A damaged or missing filter creates an unexpectedly low pressure drop.Low-differential alarms can identify probable bypass or absent media as well as high loading.
تطبيقات نموذجية
HEPA terminal filtersAHU prefiltersBag-filter banksCleanroom return-air filters
المعلمات الفنية
Typical construction for a filter differential pressure sensor and tubing kit is listed below.
| المواد الأساسية | Silicon MEMS differential element in polycarbonate housing with stainless pressure taps and silicone tubing |
|---|---|
| سمك اللوحة | 45-80 mm sensor depth |
| العرض الفعال | 90-150 mm transmitter width |
| الحد الأقصى الطول | Pressure tubing supplied up to 3000 mm per side |
| الصلب يواجه سمك | 0.5-0.8 mm stainless steel pressure taps |
| الكثافة الأساسية | 1180-1450 kg/m³ for polymer sensor housing |
| الموصلية الحرارية | 0.19-0.35 W/(m·K) for polymer enclosure material |
| إنهاء السطح | Light-gray sensor housing with red-blue port markings and satin stainless taps |
| نوع المشترك | Dual barbed high-low ports with gasketed duct taps and removable signal terminal |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Analog output or pressure switchLocal LCDHigh and low alarm relaysColored tubing and duct tap kit
Planning a Filter Differential Pressure Sensor specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
