English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
تنظيف الغرف النظيفة والتطهير والتعقيم
فراغ غرف نظيفة مقاومة للانفجار
A certified-configuration cleanroom vacuum designed for controlled recovery of combustible dust in classified areas, with conductive construction, bonded tools and sealed high-efficiency filtration.
- Conductive bonded recovery path
- Classified-area drive configurations
- Sealed HEPA or ULPA filtration
مقدمة المنتج
The Explosion-Proof Cleanroom Vacuum uses a stainless-steel recovery vessel, protected motor assembly and electrically continuous pickup path for housekeeping where a site hazard assessment identifies combustible dust or vapor risk. Conductive hose, metal wand, grounded chassis and dissipative wheels control static accumulation. A gasketed HEPA or ULPA final filter limits fine exhaust particles. Electrical or pneumatic drive, zone/division suitability and collected-material compatibility must be selected for the specific classified location.
الخصائص الرئيسية
Protected drive configuration selectable for the classified location.
Stainless-steel detachable recovery container supports controlled disposal.
Sealed downstream HEPA or ULPA filtration.
Static-dissipative wheels, hose and accessory options.
Filter-presence and pressure-monitoring options support safe operation.
مخاوف المنتج للعملاء
The design addresses ignition control, static dissipation, filter containment and safer collected-material handling.
Ignition riskThe drive, switches and conductive path are selected to match the documented area classification.
Static accumulationBonded metal parts, conductive hose and grounding connection maintain electrical continuity.
Filter leakageGasketed final filtration and optional aerosol leak testing support containment verification.
Unsafe disposalA detachable container and sealable conductive liner reduce handling and dust release.
تطبيقات نموذجية
Classified pharmaceutical powder-processing roomsControlled chemical sampling and dispensing areasCombustible conductive-dust housekeepingBattery-material and specialty-powder productionClean manufacturing areas requiring hazard-rated recovery equipment
المعلمات الفنية
The specification describes a configurable hazardous-location vacuum whose final protection level must match the classified area.
| المواد الأساسية | Type 304 stainless steel with conductive components |
|---|---|
| سمك اللوحة | 1.0–1.5 mm enclosure sheet thickness |
| العرض الفعال | 560 mm nominal mobile-frame width |
| الحد الأقصى الطول | 900 mm nominal frame length, excluding hose |
| الصلب يواجه سمك | 1.2 mm nominal vessel wall |
| الكثافة الأساسية | 7900 كغ / م3 كثافة الفولاذ المقاوم للصدأ الاسمية |
| الموصلية الحرارية | 15 W/(m·K) nominal for stainless-steel body material |
| إنهاء السطح | Brushed stainless steel with conductive black trim |
| نوع المشترك | Bonded conductive couplings and gasketed clamp closures |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Electric or pneumatic driveH14 HEPA or U15 ULPA final filterZone/division-specific protected electrical packageConductive 38 mm or 50 mm accessory systemDetachable tank, liner and manual filter-cleaning options
Planning a Explosion-Proof Cleanroom Vacuum specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
