English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
غطاء غرف الأبحاث المتاح
A single-use low-lint cleanroom coverall with a hooded, covered-zipper construction for controlled production and cleaning tasks.
- Single-use full-body coverage without a laundry cycle
- Low-lint nonwoven and microporous laminate options
- Hood, closure and footwear interfaces matched to the task
مقدمة المنتج
The Disposable Cleanroom Coverall provides full-body single-use coverage without requiring a garment laundering cycle. A lightweight white nonwoven or microporous laminate body combines an integrated hood, elasticated openings, covered zipper and optional attached footwear. Seam construction and packaging can be selected for the facility's contamination and handling procedure.
الخصائص الرئيسية
Integrated hood reduces the gap between head and body garments
Covered front zipper limits exposed closure surfaces
Elastic wrists, ankles and hood opening provide controlled fit
Optional thumb loops and attached boot covers stabilize interfaces
مخاوف المنتج للعملاء
Single-use apparel must balance low-lint coverage, movement strength and wearer comfort for the actual task. The material weight, seam type and integrated interfaces should be selected deliberately because a heavier barrier construction is not automatically the best option for every controlled operation.
Lightweight disposable fabric may tear at high-stress movement points.Select reinforced crotch and underarm construction where repeated bending is expected.
Loose hood and wrist openings can shift during work.Use elastic openings and thumb loops sized for the selected gloves and head covering.
Exposed closure edges may collect splash or particles.Specify a covered zipper with an adhesive or overlapping storm flap when appropriate.
An unnecessarily heavy barrier layer can increase heat discomfort.Match nonwoven or laminate weight to the actual contamination and splash-control task.
تطبيقات نموذجية
Suitable for cleanroom cleaning, pharmaceutical support operations, medical-device production, laboratory preparation, precision assembly and maintenance tasks governed by a single-use gowning procedure.
المعلمات الفنية
The values below cover common flash-spun, SMS and microporous-laminate disposable coverall constructions. Final thickness, dimensions, seam finish, hood and footwear arrangement should reflect the required coverage and anticipated operator movement.
| المواد الأساسية | Flash-spun polyethylene, SMS polypropylene or microporous PE-laminate nonwoven |
|---|---|
| سمك اللوحة | 0.14–0.32 mm |
| العرض الفعال | 520–790 mm per laid-flat garment section |
| الحد الأقصى الطول | 2080 mm including hood and optional footwear |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 45–95 kg/m³ apparent material bulk density |
| الموصلية الحرارية | 0.035–0.055 W/(m·K), material dependent |
| إنهاء السطح | Smooth white low-lint nonwoven or microporous film surface |
| نوع المشترك | Serged, bound or taped seams with covered front zipper |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Integrated hood or collar-only constructionOpen ankles, attached shoe covers or attached boot coversSerged, bound or taped seamsThumb loops and elasticated waistNon-sterile or documented sterile-supply processingIndividual, vacuum-sealed or multi-layer packaging
Planning a Disposable Cleanroom Coverall specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
