Five-tier electropolished stainless cleanroom wire shelving

أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ

غرفة نظيفة سلك رفوف

A five-tier stationary rack made from electropolished Type 304 stainless wire shelves and posts, providing open airflow, visible undersides and tool-free 25 mm shelf adjustment.

Five open-wire shelf levels
Electropolished Type 304 stainless
25 mm adjustment increments
Open airflow on every level

طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

Cleanroom wire shelving uses five electropolished Type 304 stainless open-grid shelves supported by four grooved stainless posts. Each shelf corner contains a tapered sleeve housing that locks around a two-piece split sleeve, producing a rigid connection without cross-bracing. The open wire pattern allows supply air to pass through stored levels and exposes containers, shelf undersides and the floor zone for inspection. Shelves can be repositioned at 25 mm post intervals, while threaded leveling bolts correct local floor variation. The all-stainless configuration avoids plated surfaces in areas subject to repeated wipe-down or damp cleaning.

الخصائص الرئيسية

The open-grid pattern leaves a direct air path through all five storage levels and minimizes broad horizontal dust ledges.

Electropolishing smooths the exposed Type 304 wire surface and removes the need for a flaking decorative coating.

Two-piece split sleeves and tapered corner housings make the shelves adjustable without drilling or horizontal braces.

Numbered 25 mm post grooves provide a repeatable reference when all four corners of a shelf are repositioned.

مخاوف المنتج للعملاء

Open cleanroom storage should preserve room airflow, reveal hidden surfaces and remain adjustable without coated components that can deteriorate during cleaning.

Broad solid shelves create stagnant zones beneath closely spaced storage levels.The five open-wire decks allow vertical room airflow to continue through the rack.

Shelf undersides and trapped debris are difficult to see during line clearance.The grid construction leaves stored loads, undersides and the floor visible from multiple directions.

Painted or chrome-plated racks can expose damaged coating after repeated wet cleaning.Electropolished Type 304 wire and posts provide a uniform stainless surface with no applied color layer.

Reconfiguring a welded rack for taller containers requires a replacement frame.Tapered corner housings release from split sleeves so each shelf can be reset at 25 mm intervals.

تطبيقات نموذجية

Cleanroom consumable storageSterile pack stagingLaboratory glassware holdingGowning-room supply organizationInspection-area tote storage

المعلمات الفنية

Typical configurable specifications for a five-tier electropolished stainless wire shelving unit are listed below.

المواد الأساسية	Five Type 304 stainless open-wire shelves with grooved stainless posts, tapered corner housings, split sleeves and threaded leveling bolts
سمك اللوحة	3.0 mm shelf grid wire with 6.0 mm reinforced perimeter rods
العرض الفعال	1220 mm overall shelf width
الحد الأقصى الطول	1830 mm maximum overall post height
الصلب يواجه سمك	1.5 mm wall thickness for Type 304 stainless tubular posts
الكثافة الأساسية	7900-8000 كجم / م3 لنوع 304 الفولاذ المقاوم للصدأ
الموصلية الحرارية	14-17 W / (m · K) لنوع 304 الفولاذ المقاوم للصدأ
إنهاء السطح	Bright electropolished Type 304 stainless wire shelves, posts and corner housings
نوع المشترك	Tapered shelf corner housings locked onto two-piece split sleeves at 25 mm grooved-post intervals
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

الخيارات المتاحة

Three to seven shelf levelsRod-and-tab shelf dividersStainless ledges on selected sidesMobile caster conversion kit

Planning a Cleanroom Wire Shelving specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا