English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
غرفة نظيفة حذاء مجلس الوزراء
A freestanding Type 304L stainless shoe cabinet with 15 open, individually divided compartments for visible and orderly gowning-room footwear storage.
- Fifteen open shoe compartments
- 278 mm clear compartment width
- Drainable perforated shelf pans
- Sloped top and adjustable feet
مقدمة المنتج
The cleanroom shoe cabinet uses a three-column by five-row arrangement to store 15 pairs of footwear without stacking. Each 278 mm-wide compartment is formed from folded Type 304L stainless dividers with a perforated rear drain path, allowing wiped surfaces to shed residual liquid instead of retaining it in a blind corner. The open front keeps occupancy immediately visible during gowning, and the brushed enclosure sits on four stainless adjustable feet. A pitched upper panel removes the flat top commonly used as an uncontrolled temporary shelf.
الخصائص الرئيسية
Folded shelf pans guide rinse or wipe-down liquid toward rear drainage openings rather than the front aisle.
The shallow 350 mm cabinet depth stores footwear without projecting deeply into a gowning-room circulation path.
A continuously welded outer frame and stainless leveling feet keep the unit rigid on uneven floors.
مخاوف المنتج للعملاء
Footwear storage must keep pairs separate and visible without creating wet blind corners or a bulky obstruction near the gowning line.
Shoes stacked on a common shelf are difficult to pair and frequently contact adjacent footwear.Fifteen separate cells maintain one defined location for each pair and prevent vertical stacking.
Deep closed cupboards hide empty positions and slow down gowning turnover.The open 350 mm-deep layout exposes every compartment at a glance from the aisle.
Wipe-down moisture pools against the rear fold of solid shelf pans.Perforated drain openings and folded falls guide residual liquid away from the storage surface.
Flat cabinet tops become uncontrolled storage ledges for shoe covers and cartons.The pitched upper panel prevents loose items from remaining on the cabinet roof.
تطبيقات نموذجية
Cleanroom entry shoe-change stationsPharmaceutical gowning roomsHospital sterile-support changing areasFood and beverage hygiene lobbiesLaboratory PPE transition zones
المعلمات الفنية
Typical configurable specifications for a 15-pair stainless cleanroom shoe cabinet are listed below.
| المواد الأساسية | Type 304L stainless steel welded cabinet with fifteen open shoe compartments and rear drainage openings |
|---|---|
| سمك اللوحة | 1.2–1.5 mm outer panels, dividers and compartment shelf pans |
| العرض الفعال | 880 mm overall width with approximately 278 mm clear compartment width |
| الحد الأقصى الطول | 1708 mm maximum height at the rear edge of the sloped top |
| الصلب يواجه سمك | 1.2–1.5 mm Type 304L stainless outer shell and internal cell panels |
| الكثافة الأساسية | 7900–8000 kg/m³ for Type 304L stainless steel |
| الموصلية الحرارية | 14–16 W/(m·K) for Type 304L stainless steel |
| إنهاء السطح | Brushed dull-polish stainless with deburred compartment edges and blue non-marking leveling pads |
| نوع المشترك | Continuously welded enclosure with folded and seam-welded compartment dividers, rear drain openings and threaded leveling feet |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
10-, 20-, 25- or 30-pair compartment layoutsNumbered blue compartment labelsPerforated hinged front doorsType 316L electropolished construction
Planning a Cleanroom Shoe Cabinet specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
