İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Test ve Validasyon Aletleri
Vibration Meter (Vibrasyon Meter)
A handheld vibration meter with a cabled piezoelectric accelerometer, coiled lead, magnetic base and contact probe for repeatable machinery condition checks.
- Acceleration, velocity and displacement.
- External cabled accelerometer.
- Magnetic base and probe mounting.
Ürün tanıtımı
This portable instrument separates the display from a single external piezoelectric accelerometer so the sensor can remain firmly coupled to a motor, fan, pump or air-handling unit while the technician reads the result. Selectable acceleration, velocity and displacement modes describe different aspects of machine motion, with peak acceleration supporting high-frequency screening, RMS velocity indicating overall severity and peak-to-peak displacement representing movement amplitude. A magnetic base improves repeatability on clean ferrous surfaces, while a threaded contact probe provides fast comparative checks where magnetic attachment is impractical.
Ana Özellikler
Acceleration, velocity and displacement modes support bearing, overall-machine and motion-amplitude checks.
Selectable low- and high-frequency bands help separate rotational vibration from higher-frequency impacts.
RMS, Peak and peak-to-peak indications match the selected vibration quantity and survey method.
Coiled sensor cable extends to machinery points while remaining compact during walk-around inspections.
Interchangeable magnetic base and stainless contact probe suit repeatable or rapid screening measurements.
Müşteri Ürün Sorunları
Comparable machine-vibration readings require the same measurement point, axis, sensor coupling, frequency band and amplitude convention, because a change in mounting method can alter the observed response.
Readings can change when the sensor is moved to a different point, direction or mounting surface.A magnetic base and marked measurement location keep sensor position and orientation consistent for trend comparison.
One vibration value cannot describe both overall machine motion and short high-frequency impacts.Selectable velocity, displacement and acceleration modes present RMS, peak-to-peak and Peak quantities appropriate to the check.
Cable movement or tension can disturb a small accelerometer during measurement.The flexible coiled lead and molded strain relief allow a slack service loop beside the mounted sensor.
Some housings are curved, painted or non-magnetic and cannot hold a flat magnetic base securely.An interchangeable stainless contact probe supports quick comparative screening when rigid magnetic coupling is unavailable.
Tipik uygulamalar
Cleanroom air-handling-unit vibration surveysMotor, fan and pump condition screeningBearing-housing comparative measurementsEquipment commissioning and post-maintenance checksRoutine trend collection at marked machine points
Teknik parametreler
Representative construction for a professional handheld vibration meter is listed below; sensor sensitivity, filter range, mounting accessory and data-transfer functions can be selected for the machinery survey plan.
| Temel malzemeler | PC/ABS handheld enclosure with TPE grip, piezoelectric accelerometer, stainless sensor shell and probe, neodymium magnetic base, copper coiled cable and digital electronics |
|---|---|
| Panel kalınlığı | Kalıplanmış el muhafazası duvarı için tipik olarak 2.0-3.0 mm |
| Effective Width (Etkili Genişlik) | Approximately 70-90 mm across the handheld indicator |
| Maksimum uzunluk | Approximately 180-220 mm for the indicator and 1000-1500 mm for the extended coiled sensor cable |
| Çelik yüz yüze kalınlığı | Typically 0.8-1.5 mm for the accelerometer shell, contact probe and threaded inserts |
| Core Density (Çekirdek Yoğunluğu) | PC / ABS muhafaza karışımı için yaklaşık 1100-1200 kg / m3 |
| Termal İletkenlik | PC / ABS muhafaza karışımı için yaklaşık 0.19-0.22 W / (m · K) |
| Yüzey bitirme | Dark-charcoal fine-texture housing, high-visibility yellow TPE grips, green backlit LCD, black coiled cable, satin stainless sensor and matte-black magnetic base |
| Ortak tip | Locking sensor-cable connectors with strain relief and a threaded accelerometer base for interchangeable magnet or contact-probe mounting |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Low-frequency machinery vibration rangeHigh-frequency bearing acceleration rangeFlat or two-pole magnetic baseShort or extended contact probeUSB data-transfer interfaceProtective carrying case with sensor compartments
Planning a Vibration Meter specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
