Vibration meter kit in three-quarter view with green LCD, coiled cable, external accelerometer, magnetic base and contact probe

Dụng cụ kiểm tra và xác nhận phòng sạch

Máy đo rung

A handheld vibration meter with a cabled piezoelectric accelerometer, coiled lead, magnetic base and contact probe for repeatable machinery condition checks.

Acceleration, velocity and displacement.
External cabled accelerometer.
Magnetic base and probe mounting.

Yêu cầu báo giá Duyệt các sản phẩm

Giới thiệu Sản phẩm

This portable instrument separates the display from a single external piezoelectric accelerometer so the sensor can remain firmly coupled to a motor, fan, pump or air-handling unit while the technician reads the result. Selectable acceleration, velocity and displacement modes describe different aspects of machine motion, with peak acceleration supporting high-frequency screening, RMS velocity indicating overall severity and peak-to-peak displacement representing movement amplitude. A magnetic base improves repeatability on clean ferrous surfaces, while a threaded contact probe provides fast comparative checks where magnetic attachment is impractical.

Các tính năng chính

External piezoelectric accelerometer isolates the measurement point from handheld enclosure movement.

Acceleration, velocity and displacement modes support bearing, overall-machine and motion-amplitude checks.

Selectable low- and high-frequency bands help separate rotational vibration from higher-frequency impacts.

RMS, Peak and peak-to-peak indications match the selected vibration quantity and survey method.

Coiled sensor cable extends to machinery points while remaining compact during walk-around inspections.

Interchangeable magnetic base and stainless contact probe suit repeatable or rapid screening measurements.

Các mối quan tâm về sản phẩm của khách hàng

Comparable machine-vibration readings require the same measurement point, axis, sensor coupling, frequency band and amplitude convention, because a change in mounting method can alter the observed response.

Readings can change when the sensor is moved to a different point, direction or mounting surface.A magnetic base and marked measurement location keep sensor position and orientation consistent for trend comparison.

One vibration value cannot describe both overall machine motion and short high-frequency impacts.Selectable velocity, displacement and acceleration modes present RMS, peak-to-peak and Peak quantities appropriate to the check.

Cable movement or tension can disturb a small accelerometer during measurement.The flexible coiled lead and molded strain relief allow a slack service loop beside the mounted sensor.

Some housings are curved, painted or non-magnetic and cannot hold a flat magnetic base securely.An interchangeable stainless contact probe supports quick comparative screening when rigid magnetic coupling is unavailable.

Các ứng dụng điển hình

Cleanroom air-handling-unit vibration surveysMotor, fan and pump condition screeningBearing-housing comparative measurementsEquipment commissioning and post-maintenance checksRoutine trend collection at marked machine points

Thông số kỹ thuật

Representative construction for a professional handheld vibration meter is listed below; sensor sensitivity, filter range, mounting accessory and data-transfer functions can be selected for the machinery survey plan.

Vật liệu lõi	PC/ABS handheld enclosure with TPE grip, piezoelectric accelerometer, stainless sensor shell and probe, neodymium magnetic base, copper coiled cable and digital electronics
Độ dày bảng điều khiển	Typically 2.0-3.0 mm for the molded handheld enclosure wall
Chiều rộng hiệu quả	Approximately 70-90 mm across the handheld indicator
Chiều dài tối đa	Approximately 180-220 mm for the indicator and 1000-1500 mm for the extended coiled sensor cable
Thép đối mặt với độ dày	Typically 0.8-1.5 mm for the accelerometer shell, contact probe and threaded inserts
Mật độ lõi	Khoảng 1100-1200 kg / m3 cho hỗn hợp vỏ bọc PC / ABS
Độ dẫn nhiệt	Xấp xỉ 0,19-0,22 W / (m·K) cho hỗn hợp vỏ bọc PC / ABS
Kết thúc bề mặt	Dark-charcoal fine-texture housing, high-visibility yellow TPE grips, green backlit LCD, black coiled cable, satin stainless sensor and matte-black magnetic base
Loại khớp nối	Locking sensor-cable connectors with strain relief and a threaded accelerometer base for interchangeable magnet or contact-probe mounting
Tùy chỉnh	Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Các tùy chọn có sẵn

Low-frequency machinery vibration rangeHigh-frequency bearing acceleration rangeFlat or two-pole magnetic baseShort or extended contact probeUSB data-transfer interfaceProtective carrying case with sensor compartments

Planning a Vibration Meter specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi