Enclosed UV air disinfection unit three-quarter main view

Temiz Oda Temizliği, Dezenfeksiyonu ve Sterilizasyon

UV Hava Dezenfeksiyon Birimi

A shielded UV-C air disinfection unit that draws room air through a controlled irradiation chamber for continuous air treatment in occupied clean and controlled spaces.

Enclosed UV-C chamber limits direct radiation outside the housing
Forced-air circulation supports continuous room-air treatment
Cleanable metal enclosure suits controlled indoor environments

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This UV air disinfection unit is designed for wall-mounted, ceiling-mounted, or mobile recirculation applications where air treatment is required without exposing occupants to the active UV-C source. A powder-coated or stainless-steel enclosure contains the irradiation zone, fan, filter, ballast, and safety switches. Unit capacity, lamp arrangement, airflow, mounting method, and monitoring functions can be selected for the room volume and operating schedule.

Ana Özellikler

Fully enclosed UV-C irradiation chamber

Intake and discharge light-baffle geometry

Low-noise forced-air circulation

Replaceable inlet prefilter

Lamp-hour counter and service indication options

Access-panel safety interlock

Wall, ceiling, or mobile mounting configurations

Easy-clean external surfaces and removable service panels

Müşteri Ürün Sorunları

Airborne contamination can remain suspended between routine surface-cleaning cycles. Open UV-C sources require strict occupancy controls, while poorly maintained recirculating units can lose output as lamps and reflective surfaces accumulate dust.

Can the unit operate in occupied rooms?The UV-C sources are enclosed behind engineered light baffles; installation and leakage verification must follow the selected configuration and site safety procedure.

How is airflow matched to the room?Fan capacity and the number of units are selected from room volume, air mixing, occupancy, and the required treatment objective.

How is declining lamp output managed?Lamp-hour monitoring, scheduled cleaning, and planned replacement help maintain the intended irradiation performance.

Is routine service straightforward?Interlocked service panels provide access to filters and lamps while preventing operation when the housing is open.

Tipik uygulamalar

Pharmaceutical support roomsCleanroom changing and preparation areasLaboratories and testing roomsClinics and waiting spacesFood-processing hygiene zonesOffices and occupied controlled environments

Teknik parametreler

The system uses a fan to move air through a reflective internal chamber fitted with germicidal UV-C sources. Light traps, sealed access panels, and electrical interlocks are used to control radiation leakage, while replaceable prefilters help limit dust accumulation on lamps and internal surfaces.

Temel malzemeler	Aluminum or stainless-steel enclosure with UV-resistant internal components
Panel kalınlığı	15–30 mm folded and reinforced housing sections
Effective Width (Etkili Genişlik)	450–700 mm unit width
Maksimum uzunluk	900–1400 mm overall unit length or height
Çelik yüz yüze kalınlığı	0.8–1.2 mm metal facing
Core Density (Çekirdek Yoğunluğu)	35–45 kg/m³ acoustic insulation where specified
Termal İletkenlik	0.030–0.040 W/(m·K) for optional acoustic insulation
Yüzey bitirme	White powder coating or brushed stainless steel with cleanable louvers
Ortak tip	Screw-fastened sealed housing with baffled air inlet and outlet joints
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Wall-mounted, ceiling-mounted, or mobile formatPowder-coated steel, aluminum, or stainless-steel housingVariable fan speed and low-noise modeLamp-hour counter and UV intensity monitorRemote run status and alarm contactAlternative filter gradesMultiple voltage and frequency configurations

Planning a UV Air Disinfection Unit specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun