Nhà cung cấp một cửa của bạn cho thiết bị phòng sạch và thiết bị vô trùng cơ sở thiết yếuHỗ trợ dự án quốc tế
Open mobile navigationClose mobile navigation
Làm sạch phòng sạch, khử trùng và tiệt trùng

Đơn vị khử trùng không khí UV

A shielded UV-C air disinfection unit that draws room air through a controlled irradiation chamber for continuous air treatment in occupied clean and controlled spaces.
  • Enclosed UV-C chamber limits direct radiation outside the housing
  • Forced-air circulation supports continuous room-air treatment
  • Cleanable metal enclosure suits controlled indoor environments
Yêu cầu báo giá Duyệt các sản phẩm

Giới thiệu Sản phẩm

This UV air disinfection unit is designed for wall-mounted, ceiling-mounted, or mobile recirculation applications where air treatment is required without exposing occupants to the active UV-C source. A powder-coated or stainless-steel enclosure contains the irradiation zone, fan, filter, ballast, and safety switches. Unit capacity, lamp arrangement, airflow, mounting method, and monitoring functions can be selected for the room volume and operating schedule.

Các tính năng chính

Fully enclosed UV-C irradiation chamber

Intake and discharge light-baffle geometry

Low-noise forced-air circulation

Replaceable inlet prefilter

Lamp-hour counter and service indication options

Access-panel safety interlock

Wall, ceiling, or mobile mounting configurations

Easy-clean external surfaces and removable service panels

Các mối quan tâm về sản phẩm của khách hàng

Airborne contamination can remain suspended between routine surface-cleaning cycles. Open UV-C sources require strict occupancy controls, while poorly maintained recirculating units can lose output as lamps and reflective surfaces accumulate dust.

Can the unit operate in occupied rooms?The UV-C sources are enclosed behind engineered light baffles; installation and leakage verification must follow the selected configuration and site safety procedure.
How is airflow matched to the room?Fan capacity and the number of units are selected from room volume, air mixing, occupancy, and the required treatment objective.
How is declining lamp output managed?Lamp-hour monitoring, scheduled cleaning, and planned replacement help maintain the intended irradiation performance.
Is routine service straightforward?Interlocked service panels provide access to filters and lamps while preventing operation when the housing is open.

Các ứng dụng điển hình

Pharmaceutical support roomsCleanroom changing and preparation areasLaboratories and testing roomsClinics and waiting spacesFood-processing hygiene zonesOffices and occupied controlled environments

Thông số kỹ thuật

The system uses a fan to move air through a reflective internal chamber fitted with germicidal UV-C sources. Light traps, sealed access panels, and electrical interlocks are used to control radiation leakage, while replaceable prefilters help limit dust accumulation on lamps and internal surfaces.

Vật liệu lõiAluminum or stainless-steel enclosure with UV-resistant internal components
Độ dày bảng điều khiển15–30 mm folded and reinforced housing sections
Chiều rộng hiệu quả450–700 mm unit width
Chiều dài tối đa900–1400 mm overall unit length or height
Thép đối mặt với độ dày0.8–1.2 mm metal facing
Mật độ lõi35–45 kg/m³ acoustic insulation where specified
Độ dẫn nhiệt0.030–0.040 W/(m·K) for optional acoustic insulation
Kết thúc bề mặtWhite powder coating or brushed stainless steel with cleanable louvers
Loại khớp nốiScrew-fastened sealed housing with baffled air inlet and outlet joints
Tùy chỉnhCó sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Các tùy chọn có sẵn

Wall-mounted, ceiling-mounted, or mobile formatPowder-coated steel, aluminum, or stainless-steel housingVariable fan speed and low-noise modeLamp-hour counter and UV intensity monitorRemote run status and alarm contactAlternative filter gradesMultiple voltage and frequency configurations

Planning a UV Air Disinfection Unit specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi
Email cho chúng tôi WhatsApp WeChat

Trang chủ

Sản phẩm

Tin tức

Về chúng tôi

Liên hệ