Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Limpieza de sala limpia, desinfección y esterilización
Unidad de desinfección UV
A shielded UV-C air disinfection unit that draws room air through a controlled irradiation chamber for continuous air treatment in occupied clean and controlled spaces.
- Enclosed UV-C chamber limits direct radiation outside the housing
- Forced-air circulation supports continuous room-air treatment
- Cleanable metal enclosure suits controlled indoor environments
Introducción del producto
This UV air disinfection unit is designed for wall-mounted, ceiling-mounted, or mobile recirculation applications where air treatment is required without exposing occupants to the active UV-C source. A powder-coated or stainless-steel enclosure contains the irradiation zone, fan, filter, ballast, and safety switches. Unit capacity, lamp arrangement, airflow, mounting method, and monitoring functions can be selected for the room volume and operating schedule.
Características clave
Intake and discharge light-baffle geometry
Low-noise forced-air circulation
Replaceable inlet prefilter
Lamp-hour counter and service indication options
Access-panel safety interlock
Wall, ceiling, or mobile mounting configurations
Easy-clean external surfaces and removable service panels
Preocupaciones del producto del cliente
Airborne contamination can remain suspended between routine surface-cleaning cycles. Open UV-C sources require strict occupancy controls, while poorly maintained recirculating units can lose output as lamps and reflective surfaces accumulate dust.
Can the unit operate in occupied rooms?The UV-C sources are enclosed behind engineered light baffles; installation and leakage verification must follow the selected configuration and site safety procedure.
How is airflow matched to the room?Fan capacity and the number of units are selected from room volume, air mixing, occupancy, and the required treatment objective.
How is declining lamp output managed?Lamp-hour monitoring, scheduled cleaning, and planned replacement help maintain the intended irradiation performance.
Is routine service straightforward?Interlocked service panels provide access to filters and lamps while preventing operation when the housing is open.
Aplicaciones típicas
Salas de Apoyo FarmacéuticoCleanroom changing and preparation areasLaboratories and testing roomsClinics and waiting spacesFood-processing hygiene zonesOffices and occupied controlled environments
Parámetros técnicos
The system uses a fan to move air through a reflective internal chamber fitted with germicidal UV-C sources. Light traps, sealed access panels, and electrical interlocks are used to control radiation leakage, while replaceable prefilters help limit dust accumulation on lamps and internal surfaces.
| Materiales Core | Aluminum or stainless-steel enclosure with UV-resistant internal components |
|---|---|
| Panel de espesor | 15–30 mm folded and reinforced housing sections |
| Ancho efectivo | 450–700 mm unit width |
| Longitud máxima | 900–1400 mm overall unit length or height |
| Acero frente a espesor | 0.8–1.2 mm metal facing |
| Densidad Core | 35–45 kg/m³ acoustic insulation where specified |
| Conductividad térmica | 0.030–0.040 W/(m·K) for optional acoustic insulation |
| Superficie acabada | White powder coating or brushed stainless steel with cleanable louvers |
| Tipo conjunto | Screw-fastened sealed housing with baffled air inlet and outlet joints |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Wall-mounted, ceiling-mounted, or mobile formatPowder-coated steel, aluminum, or stainless-steel housingVariable fan speed and low-noise modeLamp-hour counter and UV intensity monitorRemote run status and alarm contactAlternative filter gradesMultiple voltage and frequency configurations
Planning a UV Air Disinfection Unit specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
