İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri
paslanmaz çelik raflar
A four-level stationary shelving system with solid Type 316 stainless shelf pans, raised marine edges and adjustable Type 304 stainless posts for clean storage in demanding washdown areas.
- Four solid Type 316 shelf levels
- Raised marine-edge shelf pans
- 25 mm shelf-height adjustment
- Type 304 posts with leveling feet
Ürün tanıtımı
The stainless steel shelving unit combines four solid Type 316 shelf pans with Type 304 stainless tubular posts and adjustable leveling feet. Each shelf has a shallow raised marine edge that helps keep drips and small containers within the shelf footprint while leaving a broad uninterrupted surface for wipe-down. Tapered corner collars engage split sleeves on the posts, allowing each level to be repositioned in 25 mm increments without drilling the frame. Smooth formed corners, open sides and accessible undersides reduce concealed ledges and make every structural surface reachable during routine cleaning.
Ana Özellikler
A shallow raised marine edge limits runoff without creating a tall front obstruction around boxes, trays or instruments.
Tapered corner collars lock onto post sleeves at 25 mm increments, so storage clearances can be changed without permanent fasteners.
Threaded stainless leveling feet stabilize the stationary rack while keeping the lowest shelf clear of the floor-cleaning zone.
Müşteri Ürün Sorunları
Stationary clean storage needs smooth corrosion-resistant shelf surfaces, usable spill control and adjustable clearances without inaccessible cabinet cavities.
Wire shelves allow small vials, caps and drips to pass onto the level below.Four continuous solid pans provide uninterrupted support and shallow raised edges that keep small spills on the originating level.
Fixed shelf spacing wastes vertical capacity when stored containers change height.Split sleeves and tapered corner collars let each shelf move independently in 25 mm increments.
Harsh wet cleaning causes ordinary plated shelving to pit or shed finish.Type 316 shelf pans and stainless corners expose corrosion-resistant metal rather than a sacrificial coating.
Uneven floors leave tall storage units rocking during loading and cleaning.Four threaded leveling feet compensate individually while preserving an open, visible floor clearance.
Tipik uygulamalar
Cleanroom component and tray storageSterile-processing supply roomsWet laboratory consumable storagePharmaceutical support areasCorrosion-sensitive instrument holding
Teknik parametreler
Typical configurable specifications for a four-level solid stainless cleanroom shelving unit are listed below.
| Temel malzemeler | Four solid Type 316 stainless shelf pans with raised marine edges, Type 304 stainless tubular posts, tapered corner collars and adjustable leveling feet |
|---|---|
| Panel kalınlığı | 1.2 mm formed solid shelf pans |
| Effective Width (Etkili Genişlik) | 1220 mm overall shelving width |
| Maksimum uzunluk | 1830 mm maximum overall post height |
| Çelik yüz yüze kalınlığı | 1.2 mm Type 316 stainless shelf surfaces with 1.5 mm Type 304 stainless post walls |
| Core Density (Çekirdek Yoğunluğu) | 7980–8000 kg/m³ for Type 316 stainless shelf pans |
| Termal İletkenlik | 14–16 W/(m·K) for Type 316 stainless steel |
| Yüzey bitirme | Uniform polished Type 316 shelf pans with brushed Type 304 posts and natural stainless corner collars |
| Ortak tip | Tapered shelf corner collars locked to split post sleeves at 25 mm increments, with threaded stainless leveling feet |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Type 304 solid shelf packageTwo to six shelf levelsPerforated shelf pansStainless side and rear ledges
Planning a Stainless Steel Shelving specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
