Four-level Type 316 solid stainless steel cleanroom shelving

クリーンルーム家具 · ステンレス製品

ステンレス鋼棚

A four-level stationary shelving system with solid Type 316 stainless shelf pans, raised marine edges and adjustable Type 304 stainless posts for clean storage in demanding washdown areas.

Four solid Type 316 shelf levels
Raised marine-edge shelf pans
25 mm shelf-height adjustment
Type 304 posts with leveling feet

見積もりリクエスト製品案内

商品紹介

The stainless steel shelving unit combines four solid Type 316 shelf pans with Type 304 stainless tubular posts and adjustable leveling feet. Each shelf has a shallow raised marine edge that helps keep drips and small containers within the shelf footprint while leaving a broad uninterrupted surface for wipe-down. Tapered corner collars engage split sleeves on the posts, allowing each level to be repositioned in 25 mm increments without drilling the frame. Smooth formed corners, open sides and accessible undersides reduce concealed ledges and make every structural surface reachable during routine cleaning.

主要な特徴

Solid Type 316 shelf pans tolerate frequent contact with chloride-containing cleaners and wet laboratory loads better than ordinary plated shelving.

A shallow raised marine edge limits runoff without creating a tall front obstruction around boxes, trays or instruments.

Tapered corner collars lock onto post sleeves at 25 mm increments, so storage clearances can be changed without permanent fasteners.

Threaded stainless leveling feet stabilize the stationary rack while keeping the lowest shelf clear of the floor-cleaning zone.

お客様の製品に関する懸念事項

Stationary clean storage needs smooth corrosion-resistant shelf surfaces, usable spill control and adjustable clearances without inaccessible cabinet cavities.

Wire shelves allow small vials, caps and drips to pass onto the level below.Four continuous solid pans provide uninterrupted support and shallow raised edges that keep small spills on the originating level.

Fixed shelf spacing wastes vertical capacity when stored containers change height.Split sleeves and tapered corner collars let each shelf move independently in 25 mm increments.

Harsh wet cleaning causes ordinary plated shelving to pit or shed finish.Type 316 shelf pans and stainless corners expose corrosion-resistant metal rather than a sacrificial coating.

Uneven floors leave tall storage units rocking during loading and cleaning.Four threaded leveling feet compensate individually while preserving an open, visible floor clearance.

典型的な用途

Cleanroom component and tray storageSterile-processing supply roomsWet laboratory consumable storagePharmaceutical support areasCorrosion-sensitive instrument holding

技術的なパラメータ

Typical configurable specifications for a four-level solid stainless cleanroom shelving unit are listed below.

コア材料	Four solid Type 316 stainless shelf pans with raised marine edges, Type 304 stainless tubular posts, tapered corner collars and adjustable leveling feet
パネルの厚さ	1.2 mm formed solid shelf pans
有効幅	1220 mm overall shelving width
最大長さ	1830 mm maximum overall post height
鋼鉄の厚さを直面する	1.2 mm Type 316 stainless shelf surfaces with 1.5 mm Type 304 stainless post walls
コア密度	7980–8000 kg/m³ for Type 316 stainless shelf pans
熱伝導率	14–16 W/(m·K) for Type 316 stainless steel
表面仕上げ	Uniform polished Type 316 shelf pans with brushed Type 304 posts and natural stainless corner collars
ジョイントタイプ	Tapered shelf corner collars locked to split post sleeves at 25 mm increments, with threaded stainless leveling feet
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Type 304 solid shelf packageTwo to six shelf levelsPerforated shelf pansStainless side and rear ledges

Planning a Stainless Steel Shelving specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する