İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kontrolü ve Çevre İzleme Sistemleri
Modbus iletişim ağ geçidi
An industrial gateway that connects serial Modbus cleanroom instruments to Ethernet-based Modbus TCP supervisory and monitoring systems.
- Modbus RTU to TCP Conversion
- Isolated Serial Ports
- Multi-Client Ethernet Access
- Traffic and Error Diagnostics
Ürün tanıtımı
The Modbus protocol gateway converts Modbus RTU or ASCII frames on RS-485 or RS-232 links into Modbus TCP transactions on Ethernet. Serial-port isolation protects communication branches from ground-potential differences, while configurable timeouts and retry behavior suit sensors with different response speeds. Multiple TCP clients can access mapped serial devices within controlled connection limits. Web configuration, traffic counters and exception diagnostics help engineers locate duplicate addresses, framing errors and offline instruments without probing each cleanroom device individually.
Ana Özellikler
Isolated serial ports reduce ground-loop and surge effects across long RS-485 trunks.
Per-port baud rate, parity and timeout settings match existing cleanroom instruments.
Diagnostic counters identify CRC errors, timeouts and unreachable slave addresses.
Müşteri Ürün Sorunları
A Modbus gateway must manage timing, addressing and electrical differences between serial field buses and multiple Ethernet clients.
Serial devices use different baud rate or parity settings on separate branches.Independent serial-port configuration preserves each trunk's communication format.
Two devices share the same slave address and respond unpredictably.Traffic diagnostics expose repeated responses and address conflicts for correction.
A long RS-485 trunk introduces ground and surge disturbances.Galvanic isolation separates field serial wiring from Ethernet and power electronics.
Several software clients overload a slow serial device.Connection limits, polling control and response timeout settings manage request traffic.
Tipik uygulamalar
FFU network integrationCleanroom sensor gatewaysEnergy meter collectionLegacy controller modernization
Teknik parametreler
Typical construction values for an industrial Modbus serial-to-Ethernet gateway are shown below.
| Temel malzemeler | FR-4 communication board with isolated transceivers in glass-filled flame-retardant polymer DIN-rail enclosure |
|---|---|
| Panel kalınlığı | 85-130 mm gateway depth |
| Effective Width (Etkili Genişlik) | 25-80 mm DIN-rail width |
| Maksimum uzunluk | Up to 150 mm housing height |
| Çelik yüz yüze kalınlığı | 0 mm; non-metallic enclosure |
| Core Density (Çekirdek Yoğunluğu) | 1180-1550 kg/m³ for reinforced-polymer enclosure parts |
| Termal İletkenlik | 0.19-0.40 W/(m·K) for polymer enclosure material |
| Yüzey bitirme | Dark-blue reinforced-polymer housing with green serial and Ethernet status LEDs |
| Ortak tip | DIN-rail clip with RJ45 Ethernet, removable RS-485 terminals and redundant DC power input |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
One to four serial portsRS-232, RS-422 or RS-485Dual Ethernet portsOptional metal enclosure
Planning a Modbus Communication Gateway specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
