Complete dark-blue Modbus gateway with RJ45 Ethernet and green serial status LEDs

클린룸 제어 및 환경 모니터링 시스템 (Cleanroom Control and Environment Monitoring Systems)

Modbus 통신 게이트웨이

An industrial gateway that connects serial Modbus cleanroom instruments to Ethernet-based Modbus TCP supervisory and monitoring systems.

Modbus RTU to TCP Conversion
Isolated Serial Ports
Multi-Client Ethernet Access
Traffic and Error Diagnostics

견적 요청 제품 찾아보기

상품 소개

The Modbus protocol gateway converts Modbus RTU or ASCII frames on RS-485 or RS-232 links into Modbus TCP transactions on Ethernet. Serial-port isolation protects communication branches from ground-potential differences, while configurable timeouts and retry behavior suit sensors with different response speeds. Multiple TCP clients can access mapped serial devices within controlled connection limits. Web configuration, traffic counters and exception diagnostics help engineers locate duplicate addresses, framing errors and offline instruments without probing each cleanroom device individually.

주요 기능

Modbus RTU, ASCII and TCP conversion links legacy field devices to Ethernet systems.

Isolated serial ports reduce ground-loop and surge effects across long RS-485 trunks.

Per-port baud rate, parity and timeout settings match existing cleanroom instruments.

Diagnostic counters identify CRC errors, timeouts and unreachable slave addresses.

고객 제품 관심사

A Modbus gateway must manage timing, addressing and electrical differences between serial field buses and multiple Ethernet clients.

Serial devices use different baud rate or parity settings on separate branches.Independent serial-port configuration preserves each trunk's communication format.

Two devices share the same slave address and respond unpredictably.Traffic diagnostics expose repeated responses and address conflicts for correction.

A long RS-485 trunk introduces ground and surge disturbances.Galvanic isolation separates field serial wiring from Ethernet and power electronics.

Several software clients overload a slow serial device.Connection limits, polling control and response timeout settings manage request traffic.

일반적인 응용 프로그램

FFU network integrationCleanroom sensor gatewaysEnergy meter collectionLegacy controller modernization

기술 매개변수

Typical construction values for an industrial Modbus serial-to-Ethernet gateway are shown below.

핵심 재료	FR-4 communication board with isolated transceivers in glass-filled flame-retardant polymer DIN-rail enclosure
패널 두께	85-130 mm gateway depth
유효 폭	25-80 mm DIN-rail width
최대 길이	Up to 150 mm housing height
강철 면면 두께	0 mm; non-metallic enclosure
코어 밀도	1180-1550 kg/m³ for reinforced-polymer enclosure parts
열전도도 (Thermal Conductivity)	0.19-0.40 W/(m·K) for polymer enclosure material
표면 마무리	Dark-blue reinforced-polymer housing with green serial and Ethernet status LEDs
접합 유형	DIN-rail clip with RJ45 Ethernet, removable RS-485 terminals and redundant DC power input
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

One to four serial portsRS-232, RS-422 or RS-485Dual Ethernet portsOptional metal enclosure

Planning a Modbus Communication Gateway specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.