İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hava Dağıtım Sistemleri
Galvaniz Çelik Dikdörtgen Hava Kanalı
A rigid G90 galvanized sheet-steel duct fabricated in rectangular sections for space-efficient cleanroom supply, return and general ventilation routes.
- G90 Zinc-Coated Steel
- Space-Efficient Rectangular Form
- Reinforced Flat Panels
- Sealed Flange Connections
Ürün tanıtımı
Galvanized steel rectangular ductwork provides a durable and economical air path where ceiling zones, risers or equipment connections favor a rectangular section. Straight sections are formed from zinc-coated sheet steel with Pittsburgh-lock or welded longitudinal seams, transverse reinforcement and flanged ends selected for the duct dimensions and pressure duty. Smooth internal surfaces reduce friction and provide accessible wipe-down areas, while mastic or closed-cell gaskets seal the transverse joints. The format integrates readily with dampers, filters, terminal housings and rectangular equipment plenums.
Ana Özellikler
Rectangular proportions use shallow ceiling voids more efficiently than equivalent circular ductwork.
Standing seams, beading or external reinforcement limit panel vibration on larger duct faces.
Flanged transverse joints allow long routes to be assembled from replaceable factory-made sections.
Müşteri Ürün Sorunları
Rectangular ductwork must remain rigid, clean and sufficiently airtight even when broad panels and numerous field joints are installed above a congested cleanroom ceiling.
Wide duct faces drum or flex when fan pressure changes.Sheet gauge, cross-breaking and reinforcement spacing are selected for the largest panel dimension and pressure class.
Air leakage at repeated transverse joints wastes conditioned cleanroom airflow.Matched flange corners, continuous gasket and exterior sealant create a consistent joint compression path.
A round duct cannot fit the available shallow ceiling zone.A low-profile rectangular aspect ratio preserves flow area while reducing installed depth.
Exposed cut edges corrode after site modification.Cut edges are deburred, cleaned and protected with a compatible zinc-rich repair coating.
Tipik uygulamalar
Cleanroom supply-air mainsReturn-air and recirculation ductsAir-handling-unit connectionsCeiling service corridorsGeneral laboratory ventilation
Teknik parametreler
Common fabrication ranges for indoor G90 galvanized rectangular air duct are listed below.
| Temel malzemeler | G90 hot-dip galvanized carbon-steel sheet |
|---|---|
| Panel kalınlığı | 0.55–1.50 mm, selected by duct size and pressure duty |
| Effective Width (Etkili Genişlik) | 150–2000 mm rectangular side dimension |
| Maksimum uzunluk | 1500 mm per standard fabricated section |
| Çelik yüz yüze kalınlığı | 0.55–1.50 mm galvanized sheet body |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850 kg/m³ solid steel construction |
| Termal İletkenlik | Approximately 50–55 W/(m·K) for low-carbon galvanized sheet |
| Yüzey bitirme | Continuous G90 zinc coating with optional external powder coating |
| Ortak tip | TDC/TDF or angle flange with closed-cell gasket and sealed corners |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Internal or external thermal insulationPowder-coated external finishAccess doors and test portsTransitions, offsets and equipment plenums
Planning a Galvanized Steel Rectangular Air Duct specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
