Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Luftverteilungssysteme
Verzinkter Stahl rechteckige Luftleitung
A rigid G90 galvanized sheet-steel duct fabricated in rectangular sections for space-efficient cleanroom supply, return and general ventilation routes.
- G90 Zinc-Coated Steel
- Space-Efficient Rectangular Form
- Reinforced Flat Panels
- Sealed Flange Connections
Produkteinführung
Galvanized steel rectangular ductwork provides a durable and economical air path where ceiling zones, risers or equipment connections favor a rectangular section. Straight sections are formed from zinc-coated sheet steel with Pittsburgh-lock or welded longitudinal seams, transverse reinforcement and flanged ends selected for the duct dimensions and pressure duty. Smooth internal surfaces reduce friction and provide accessible wipe-down areas, while mastic or closed-cell gaskets seal the transverse joints. The format integrates readily with dampers, filters, terminal housings and rectangular equipment plenums.
Key Features
Rectangular proportions use shallow ceiling voids more efficiently than equivalent circular ductwork.
Standing seams, beading or external reinforcement limit panel vibration on larger duct faces.
Flanged transverse joints allow long routes to be assembled from replaceable factory-made sections.
Kunden Produktbedenken
Rectangular ductwork must remain rigid, clean and sufficiently airtight even when broad panels and numerous field joints are installed above a congested cleanroom ceiling.
Wide duct faces drum or flex when fan pressure changes.Sheet gauge, cross-breaking and reinforcement spacing are selected for the largest panel dimension and pressure class.
Air leakage at repeated transverse joints wastes conditioned cleanroom airflow.Matched flange corners, continuous gasket and exterior sealant create a consistent joint compression path.
A round duct cannot fit the available shallow ceiling zone.A low-profile rectangular aspect ratio preserves flow area while reducing installed depth.
Exposed cut edges corrode after site modification.Cut edges are deburred, cleaned and protected with a compatible zinc-rich repair coating.
Typische Anwendungen
Cleanroom supply-air mainsReturn-air and recirculation ductsAir-handling-unit connectionsCeiling service corridorsGeneral laboratory ventilation
Technische Parameter
Common fabrication ranges for indoor G90 galvanized rectangular air duct are listed below.
| Core Material | G90 hot-dip galvanized carbon-steel sheet |
|---|---|
| Panel Dicke | 0.55–1.50 mm, selected by duct size and pressure duty |
| Effektive Breite | 150–2000 mm rectangular side dimension |
| Maximale Länge | 1500 mm per standard fabricated section |
| Stahl facing Dicke | 0.55–1.50 mm galvanized sheet body |
| Kerndichte | Approximately 7850 kg/m³ solid steel construction |
| Thermische Leitfähigkeit | Approximately 50–55 W/(m·K) for low-carbon galvanized sheet |
| Oberfläche Finish | Continuous G90 zinc coating with optional external powder coating |
| Gemeinsamer Typ | TDC/TDF or angle flange with closed-cell gasket and sealed corners |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Internal or external thermal insulationPowder-coated external finishAccess doors and test portsTransitions, offsets and equipment plenums
Planning a Galvanized Steel Rectangular Air Duct specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
