İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hava Dağıtım Sistemleri
Sabit Hava Hacim Kontrolörü
A self-powered duct regulator whose aerodynamic blade and calibrated spring mechanism hold a selected airflow across a defined pressure range.
- Pressure-Compensating Blade
- Adjustable Airflow Setpoint
- No External Control Power
- Supply or Extract Service
Ürün tanıtımı
The constant air volume controller uses the force acting on an aerodynamic blade to oppose a calibrated spring or bellows mechanism. As duct pressure rises, the blade moves toward the throttling position; as pressure falls, it opens to preserve the selected airflow. The setpoint is adjusted on an external scale without entering the air path. A rectangular flanged casing supports direct duct installation, while low-friction bearings and an accessible mechanism allow stable movement through the working pressure range.
Ana Özellikler
An external scale allows the nominal volume-flow setting to be changed after the duct is installed.
Low-friction bearings and a protected spring mechanism promote repeatable response at modest differential pressure.
Optional acoustic treatment and a downstream silencer reduce regenerated noise where the regulator absorbs a large pressure difference.
Müşteri Ürün Sorunları
Reliable constant-volume operation requires sufficient differential pressure, uniform inlet airflow and an adjustment range that matches the actual branch duty.
Branch airflow increases whenever the main duct pressure rises.The pressure-responsive blade closes proportionally to absorb the additional pressure and stabilize the set volume.
A regulator selected below its minimum operating pressure never reaches the scheduled airflow.The controller size and setpoint are matched to the available branch pressure over the fan operating range.
An elbow directly at the inlet creates a biased velocity profile and unstable blade motion.A straight approach or suitable flow-straightening section presents the controller with a more even face velocity.
Throttling noise becomes objectionable above a ceiling near quiet work areas.A larger controller, acoustic casing or matched secondary silencer reduces local velocity and regenerated sound.
Tipik uygulamalar
Cleanroom constant make-up air branchesLaboratory general exhaustHospital room ventilationToilet and utility extract systemsConstant-volume process support areas
Teknik parametreler
Representative construction data for a rectangular mechanical CAV controller are shown below.
| Temel malzemeler | Galvanized-steel aerodynamic control blade with stainless spring element and low-friction polymer bearings |
|---|---|
| Panel kalınlığı | 0.8–1.2 mm control blade and casing sheet |
| Effective Width (Etkili Genişlik) | 200–1000 mm nominal rectangular duct width |
| Maksimum uzunluk | Up to 800 mm casing length in the airflow direction with acoustic section |
| Çelik yüz yüze kalınlığı | 0.8–1.0 mm galvanized external casing and flanges |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850 kg/m³ for the steel blade material |
| Termal İletkenlik | Approximately 50 W/(m·K) through the galvanized aerodynamic control blade |
| Yüzey bitirme | Mill-galvanized casing with corrosion-protected adjustment hardware |
| Ortak tip | Flanged rectangular casing with internally pivoted blade and external calibrated setpoint mechanism |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Multiple factory airflow rangesAcoustic casing and secondary silencerSupply-air or extract-air calibrationPowder-coated or stainless-steel casing
Planning a Constant Air Volume Controller specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
