Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de distribución de aire para salas limpias
Controlador de volumen de aire constante por
A self-powered duct regulator whose aerodynamic blade and calibrated spring mechanism hold a selected airflow across a defined pressure range.
- Pressure-Compensating Blade
- Adjustable Airflow Setpoint
- No External Control Power
- Supply or Extract Service
Introducción del producto
The constant air volume controller uses the force acting on an aerodynamic blade to oppose a calibrated spring or bellows mechanism. As duct pressure rises, the blade moves toward the throttling position; as pressure falls, it opens to preserve the selected airflow. The setpoint is adjusted on an external scale without entering the air path. A rectangular flanged casing supports direct duct installation, while low-friction bearings and an accessible mechanism allow stable movement through the working pressure range.
Características clave
An external scale allows the nominal volume-flow setting to be changed after the duct is installed.
Low-friction bearings and a protected spring mechanism promote repeatable response at modest differential pressure.
Optional acoustic treatment and a downstream silencer reduce regenerated noise where the regulator absorbs a large pressure difference.
Preocupaciones del producto del cliente
Reliable constant-volume operation requires sufficient differential pressure, uniform inlet airflow and an adjustment range that matches the actual branch duty.
Branch airflow increases whenever the main duct pressure rises.The pressure-responsive blade closes proportionally to absorb the additional pressure and stabilize the set volume.
A regulator selected below its minimum operating pressure never reaches the scheduled airflow.The controller size and setpoint are matched to the available branch pressure over the fan operating range.
An elbow directly at the inlet creates a biased velocity profile and unstable blade motion.A straight approach or suitable flow-straightening section presents the controller with a more even face velocity.
Throttling noise becomes objectionable above a ceiling near quiet work areas.A larger controller, acoustic casing or matched secondary silencer reduces local velocity and regenerated sound.
Aplicaciones típicas
Cleanroom constant make-up air branchesLaboratory general exhaustHospital room ventilationToilet and utility extract systemsConstant-volume process support areas
Parámetros técnicos
Representative construction data for a rectangular mechanical CAV controller are shown below.
| Materiales Core | Galvanized-steel aerodynamic control blade with stainless spring element and low-friction polymer bearings |
|---|---|
| Panel de espesor | 0.8–1.2 mm control blade and casing sheet |
| Ancho efectivo | 200–1000 mm nominal rectangular duct width |
| Longitud máxima | Up to 800 mm casing length in the airflow direction with acoustic section |
| Acero frente a espesor | 0.8–1.0 mm galvanized external casing and flanges |
| Densidad Core | Approximately 7850 kg/m³ for the steel blade material |
| Conductividad térmica | Approximately 50 W/(m·K) through the galvanized aerodynamic control blade |
| Superficie acabada | Mill-galvanized casing with corrosion-protected adjustment hardware |
| Tipo conjunto | Flanged rectangular casing with internally pivoted blade and external calibrated setpoint mechanism |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Multiple factory airflow rangesAcoustic casing and secondary silencerSupply-air or extract-air calibrationPowder-coated or stainless-steel casing
Planning a Constant Air Volume Controller specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
