Complete all-aluminum cleanroom T-grid with main and cross tees

Temiz Oda Duvar ve Tavan Sistemleri

Alüminyum Temiz Oda T-Grid

A lightweight exposed ceiling suspension system manufactured entirely from aluminum, intended for humid, sanitary and chemical-cleaning interiors where ordinary carbon-steel grid is less suitable.

100% Aluminum Construction
Corrosion-Resistant Ceiling Framework
24 mm Exposed T-Bar Face
Demountable Hook-End Cross Tees

Alıntı isteği Browse ürünleri

Ürün tanıtımı

All-Aluminum Cleanroom T-Grid uses aluminum main tees, cross tees and perimeter components to form a modular lay-in ceiling. Removing the carbon-steel web reduces the risk of red rust in humid or frequently cleaned rooms and lowers the weight handled overhead. Hook-end cross tees engage the main runners without permanent welding, allowing grid sections and ceiling panels to be dismantled. The 24 mm exposed flange accepts common ceiling modules and can carry an optional cleanroom gasket when a sealed panel interface is required.

Ana Özellikler

Aluminum throughout the profile offers strong resistance to interior humidity and many sanitation environments.

Low component mass reduces overhead handling effort during grid assembly.

Hook-end cross tees can be disengaged for alterations without cutting the main runner.

Uniform metal construction avoids dissimilar exposed materials across the visible ceiling network.

Lay-in modules preserve direct access to filters, dampers and utilities above the room.

Müşteri Ürün Sorunları

All-aluminum grid is chosen when corrosion, component weight, demountability and a consistent visible finish outweigh heavy-load requirements.

Cut edges on conventional steel grid can begin rusting after repeated humid cleaning cycles.An all-aluminum substrate removes the exposed carbon-steel corrosion source.

Long metal runners are tiring to position and align over an occupied fit-out area.Lower-density aluminum profiles reduce the mass installers handle at ceiling level.

Permanent cross-tee connections obstruct later changes to filters and lighting modules.Demountable hook ends release individual cross tees while leaving adjacent runs intact.

Mixed metals and mismatched caps create visible colour differences across the ceiling.Main tees, cross tees and perimeter pieces use the same aluminum substrate and finish family.

Tipik uygulamalar

Food and drug preparation roomsLaboratories with humid processesClean utility and wash-down areasHealthcare hygiene ceilingsControlled rooms near corrosive indoor atmospheres

Teknik parametreler

Typical dimensions for an all-aluminum exposed T-grid suspension system are listed below.

Temel malzemeler	N/A — roll-formed or extruded all-aluminum T profiles
Panel kalınlığı	N/A — T-grid is a ceiling support profile rather than a panel
Effective Width (Etkili Genişlik)	24 mm exposed T-bar face
Maksimum uzunluk	3660 mm main tee
Çelik yüz yüze kalınlığı	N/A — system contains no steel facing
Core Density (Çekirdek Yoğunluğu)	N/A — hollow metal profile contains no core
Termal İletkenlik	N/A — suspension profile is not used to provide thermal resistance
Yüzey bitirme	White baked enamel or satin anodized aluminum
Ortak tip	Demountable hook-end cross tee engaging slotted aluminum main runner
Customization (Özelleşme)	Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

White baked-enamel finishSatin anodized finishFactory-applied cleanroom gasket600 mm or 1200 mm cross-tee modules

Planning a All-Aluminum Cleanroom T-Grid specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun