İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Ekipmanları Yedek Parçaları
AHU Fan
A direct-drive axial fan module with a galvanized mounting frame for replacing a matched supply, exhaust or recirculation fan inside cleanroom air-handling equipment.
- Direct-Drive Motor
- Galvanized Mounting Frame
- Replaceable Plug Connection
- Balanced Axial Impeller
Ürün tanıtımı
The AHU fan is a complete axial airflow module comprising a square galvanized mounting frame, circular inlet shroud, multi-blade impeller and rear-mounted electric motor. Its compact direct-drive arrangement avoids external belts and keeps the motor, wheel and electrical connection together as one serviceable spare part. Selection must match the original opening, airflow direction, fan duty, supply voltage, control method and connector pinout. The assembly is intended for installation inside compatible air-handling equipment with the appropriate guard, isolation and access provisions.
Ana Özellikler
A direct-coupled motor eliminates belt alignment at this fan module and keeps the rotating group compact for replacement work.
Four corner holes provide a clear mechanical reference for matching the existing AHU bulkhead or internal support panel.
A short flexible lead with a keyed plug supports controlled electrical disconnection when the mating connector and pin assignment match.
Müşteri Ürün Sorunları
A reliable replacement requires the mechanical envelope, aerodynamic duty and electrical interface to correspond with the installed AHU rather than relying on frame size alone.
A fan with the correct opening size can still deliver the wrong airflow or pressure at the system resistance.The replacement is selected against the required operating point, rotational speed, airflow direction and available performance curve.
Different corner-hole patterns or motor depths can prevent the assembly from fitting the existing fan section.Frame dimensions, hole centers, shroud diameter and total rear projection are checked against the removed unit before manufacture.
An incorrect voltage, phase arrangement or connector pinout can damage the motor or AHU controls.Motor rating, control signal, cable length, plug type and terminal assignment are matched as one electrical interface.
Impeller imbalance or loose mounting can transmit vibration into cleanroom ductwork and panels.The rotating assembly is supplied as a matched unit and the rigid four-corner frame supports even fastening to the AHU structure.
Tipik uygulamalar
Cleanroom make-up air unitsAHU recirculation sectionsEquipment exhaust modulesFiltered ventilation cabinets
Teknik parametreler
Typical construction and dimensional ranges for compact direct-drive AHU axial replacement fan assemblies are listed below.
| Temel malzemeler | Galvanized-steel frame and shroud with black engineering-polymer or coated-metal impeller and copper-wound motor |
|---|---|
| Panel kalınlığı | 1.5-3.0 mm formed fan shroud and support members |
| Effective Width (Etkili Genişlik) | 250-630 mm nominal airflow opening |
| Maksimum uzunluk | Up to 520 mm total assembly depth including motor and connector |
| Çelik yüz yüze kalınlığı | 1.5-3.0 mm galvanized mounting-frame thickness |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850 kg/m³ for galvanized-steel structural parts |
| Termal İletkenlik | 45-60 W/(m·K) for galvanized-steel structural parts |
| Yüzey bitirme | Natural galvanized silver frame and shroud with black impeller, motor housing and cable |
| Ortak tip | Four-hole square mounting flange with direct motor coupling and keyed plug-in electrical connector |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Matched AC or EC motorAlternative airflow directionCustom frame and hole centersSpecified cable and connector
Planning a AHU Fan specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
