Three-quarter front view of a complete galvanized AHU axial fan assembly

클린룸 장비 예비 부품

AHU 팬

A direct-drive axial fan module with a galvanized mounting frame for replacing a matched supply, exhaust or recirculation fan inside cleanroom air-handling equipment.

Direct-Drive Motor
Galvanized Mounting Frame
Replaceable Plug Connection
Balanced Axial Impeller

견적 요청 제품 찾아보기

상품 소개

The AHU fan is a complete axial airflow module comprising a square galvanized mounting frame, circular inlet shroud, multi-blade impeller and rear-mounted electric motor. Its compact direct-drive arrangement avoids external belts and keeps the motor, wheel and electrical connection together as one serviceable spare part. Selection must match the original opening, airflow direction, fan duty, supply voltage, control method and connector pinout. The assembly is intended for installation inside compatible air-handling equipment with the appropriate guard, isolation and access provisions.

주요 기능

The formed inlet shroud guides air into the axial impeller and provides a rigid connection between the fan ring and square support frame.

A direct-coupled motor eliminates belt alignment at this fan module and keeps the rotating group compact for replacement work.

Four corner holes provide a clear mechanical reference for matching the existing AHU bulkhead or internal support panel.

A short flexible lead with a keyed plug supports controlled electrical disconnection when the mating connector and pin assignment match.

고객 제품 관심사

A reliable replacement requires the mechanical envelope, aerodynamic duty and electrical interface to correspond with the installed AHU rather than relying on frame size alone.

A fan with the correct opening size can still deliver the wrong airflow or pressure at the system resistance.The replacement is selected against the required operating point, rotational speed, airflow direction and available performance curve.

Different corner-hole patterns or motor depths can prevent the assembly from fitting the existing fan section.Frame dimensions, hole centers, shroud diameter and total rear projection are checked against the removed unit before manufacture.

An incorrect voltage, phase arrangement or connector pinout can damage the motor or AHU controls.Motor rating, control signal, cable length, plug type and terminal assignment are matched as one electrical interface.

Impeller imbalance or loose mounting can transmit vibration into cleanroom ductwork and panels.The rotating assembly is supplied as a matched unit and the rigid four-corner frame supports even fastening to the AHU structure.

일반적인 응용 프로그램

Cleanroom make-up air unitsAHU recirculation sectionsEquipment exhaust modulesFiltered ventilation cabinets

기술 매개변수

Typical construction and dimensional ranges for compact direct-drive AHU axial replacement fan assemblies are listed below.

핵심 재료	Galvanized-steel frame and shroud with black engineering-polymer or coated-metal impeller and copper-wound motor
패널 두께	1.5-3.0 mm formed fan shroud and support members
유효 폭	250-630 mm nominal airflow opening
최대 길이	Up to 520 mm total assembly depth including motor and connector
강철 면면 두께	1.5-3.0 mm galvanized mounting-frame thickness
코어 밀도	Approximately 7850 kg/m³ for galvanized-steel structural parts
열전도도 (Thermal Conductivity)	45-60 W/(m·K) for galvanized-steel structural parts
표면 마무리	Natural galvanized silver frame and shroud with black impeller, motor housing and cable
접합 유형	Four-hole square mounting flange with direct motor coupling and keyed plug-in electrical connector
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Matched AC or EC motorAlternative airflow directionCustom frame and hole centersSpecified cable and connector

Planning a AHU Fan specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.