Front-left three-quarter view of a slim black contactless access control reader with green status light and pigtail

Temiz Oda Ekipmanları Yedek Parçaları

Erişim Kontrolü Okuyucu

A sealed slim-format credential reader that identifies compatible contactless cards, fobs or NFC credentials and passes the transaction to a separate access-control panel.

Slim Sealed Reader Housing
Contactless RFID and NFC Reading
Bicolor Visual Status Indication
OSDP or Wiegand Interface

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This access control reader is a compact external credential interface for controlled cleanroom personnel doors and airlocks. Its matte-black PC/ABS housing encloses the radio-frequency electronics behind a smooth wipeable face, with one embossed presentation symbol, a narrow bicolor status lens and an audible indicator aperture. A dark perimeter gasket sits between the reader and its slim silver mounting plate, while two countersunk holes locate the assembly on a mullion or flat frame. The single rear pigtail routes power and data to a compatible access controller; the reader does not contain a door lock, biometric imager, keypad or motor controller.

Ana Özellikler

The slim non-keypad format fits narrow door-frame and mullion positions without projecting a public control panel into the cleanroom passage.

Contactless credential reading avoids a card slot and supports a smooth front surface that is straightforward to wipe during routine facility cleaning.

One bicolor status lens and an internal audible indicator provide immediate transaction feedback without adding a screen or exposed mechanical button.

A gasketed two-hole mounting interface and single rear pigtail keep the reader body compact while separating field wiring from the credential-presenting surface.

Müşteri Ürün Sorunları

Reader replacement requires agreement between credential technology, panel protocol, voltage, conductor functions and mounting geometry; a reader that fits the frame may still be electronically incompatible.

Existing cards or mobile credentials may use a frequency or data technology that a visually similar reader cannot interpret.The reader technology is selected against the deployed 13.56 MHz, optional 125 kHz and NFC credential population before the old unit is removed.

Legacy unsupervised wiring can make communication faults difficult to distinguish from a damaged credential reader.Where the connected panel supports it, an OSDP configuration provides supervised bidirectional communication; matched Wiegand output remains available for compatible legacy panels.

A wide keypad or display housing can obstruct a narrow frame and create additional ledges in a controlled doorway.The sealed narrow reader uses a single smooth presentation face, a shallow body and two-point mounting without a keypad, touchscreen or biometric camera.

Moisture or cleaning residue reaching the rear cable opening can cause intermittent power or data faults.The continuous perimeter gasket and rear-routed single pigtail maintain a defined mounting interface when the frame surface and cable entry are properly prepared.

Tipik uygulamalar

Cleanroom personnel access doorsMaterial and personnel airlocksLaboratory controlled entrancesPharmaceutical gowning-area doors

Teknik parametreler

The following conservative dimensional and material ranges describe sealed slim-format contactless readers commonly used on controlled pedestrian door frames.

Temel malzemeler	Impact-resistant flame-retardant PC/ABS electronic housing with copper antenna, embedded circuit board and silicone perimeter gasket
Panel kalınlığı	1.5-2.5 mm nominal molded housing-wall thickness
Effective Width (Etkili Genişlik)	40-50 mm nominal reader-face width
Maksimum uzunluk	Up to 135 mm overall reader-body length
Çelik yüz yüze kalınlığı	1.0-1.8 mm nominal stainless or plated-steel mounting-plate thickness
Core Density (Çekirdek Yoğunluğu)	Approximately 1100-1190 kg/m³ for representative PC/ABS housing grades
Termal İletkenlik	Approximately 0.18-0.25 W/(m·K) for representative unfilled PC/ABS housing material
Yüzey bitirme	Fine-textured matte-black wipeable polymer face, neutral-silver mounting plate and dark-gray silicone perimeter seal
Ortak tip	Two-hole concealed rear mounting plate with continuous gasket and one keyed pigtail interface for power and panel communication
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

13.56 MHz smart-card and NFC credential supportOptional 125 kHz legacy credential compatibilityOSDP or Wiegand panel communicationBlack or light-colored reader housing to suit the door frame

Planning a Access Control Reader specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun