Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia piezas de repuesto
Control de acceso Lector
A sealed slim-format credential reader that identifies compatible contactless cards, fobs or NFC credentials and passes the transaction to a separate access-control panel.
- Slim Sealed Reader Housing
- Contactless RFID and NFC Reading
- Bicolor Visual Status Indication
- OSDP or Wiegand Interface
Introducción del producto
This access control reader is a compact external credential interface for controlled cleanroom personnel doors and airlocks. Its matte-black PC/ABS housing encloses the radio-frequency electronics behind a smooth wipeable face, with one embossed presentation symbol, a narrow bicolor status lens and an audible indicator aperture. A dark perimeter gasket sits between the reader and its slim silver mounting plate, while two countersunk holes locate the assembly on a mullion or flat frame. The single rear pigtail routes power and data to a compatible access controller; the reader does not contain a door lock, biometric imager, keypad or motor controller.
Características clave
Contactless credential reading avoids a card slot and supports a smooth front surface that is straightforward to wipe during routine facility cleaning.
One bicolor status lens and an internal audible indicator provide immediate transaction feedback without adding a screen or exposed mechanical button.
A gasketed two-hole mounting interface and single rear pigtail keep the reader body compact while separating field wiring from the credential-presenting surface.
Preocupaciones del producto del cliente
Reader replacement requires agreement between credential technology, panel protocol, voltage, conductor functions and mounting geometry; a reader that fits the frame may still be electronically incompatible.
Existing cards or mobile credentials may use a frequency or data technology that a visually similar reader cannot interpret.The reader technology is selected against the deployed 13.56 MHz, optional 125 kHz and NFC credential population before the old unit is removed.
Legacy unsupervised wiring can make communication faults difficult to distinguish from a damaged credential reader.Where the connected panel supports it, an OSDP configuration provides supervised bidirectional communication; matched Wiegand output remains available for compatible legacy panels.
A wide keypad or display housing can obstruct a narrow frame and create additional ledges in a controlled doorway.The sealed narrow reader uses a single smooth presentation face, a shallow body and two-point mounting without a keypad, touchscreen or biometric camera.
Moisture or cleaning residue reaching the rear cable opening can cause intermittent power or data faults.The continuous perimeter gasket and rear-routed single pigtail maintain a defined mounting interface when the frame surface and cable entry are properly prepared.
Aplicaciones típicas
Cleanroom personnel access doorsMaterial and personnel airlocksLaboratory controlled entrancesPharmaceutical gowning-area doors
Parámetros técnicos
The following conservative dimensional and material ranges describe sealed slim-format contactless readers commonly used on controlled pedestrian door frames.
| Materiales Core | Impact-resistant flame-retardant PC/ABS electronic housing with copper antenna, embedded circuit board and silicone perimeter gasket |
|---|---|
| Panel de espesor | 1.5-2.5 mm nominal molded housing-wall thickness |
| Ancho efectivo | 40-50 mm nominal reader-face width |
| Longitud máxima | Up to 135 mm overall reader-body length |
| Acero frente a espesor | 1.0-1.8 mm nominal stainless or plated-steel mounting-plate thickness |
| Densidad Core | Approximately 1100-1190 kg/m³ for representative PC/ABS housing grades |
| Conductividad térmica | Approximately 0.18-0.25 W/(m·K) for representative unfilled PC/ABS housing material |
| Superficie acabada | Fine-textured matte-black wipeable polymer face, neutral-silver mounting plate and dark-gray silicone perimeter seal |
| Tipo conjunto | Two-hole concealed rear mounting plate with continuous gasket and one keyed pigtail interface for power and panel communication |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
13.56 MHz smart-card and NFC credential supportOptional 125 kHz legacy credential compatibilityOSDP or Wiegand panel communicationBlack or light-colored reader housing to suit the door frame
Planning a Access Control Reader specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
