Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Control de salas limpias y sistemas de monitoreo ambiental
Z Módulo de alarma remota por
A distributed I/O module that collects local alarm contacts, drives remote indicators and reports point status to a cleanroom central alarm or monitoring system.
- Isolated Alarm Inputs
- Configurable Relay Outputs
- Local Point LEDs
- Networked Distributed I/O
Introducción del producto
The remote alarm module places alarm acquisition close to cleanroom equipment, sensors or utility panels. Isolated digital inputs receive dry contacts or selected voltage states, and local LEDs show channel condition during service. Relay outputs can operate beacons, sounders or shutdown interlocks under central or local logic. RS-485 or Ethernet communication transfers point status, channel diagnostics and output commands to the central system, reducing long individual cable runs from every alarm point.
Características clave
Local channel LEDs show input and relay state without opening software tools.
Distributed placement reduces the amount of home-run alarm cable across the facility.
Watchdog and communication-fault indication distinguish a network problem from a normal input.
Preocupaciones del producto del cliente
Distributed alarm I/O must preserve channel identity and reveal communication loss rather than silently freezing the last known state.
Dozens of alarm contacts require long home-run cables to the central panel.A local module aggregates nearby points onto one supervised communication link.
Technicians cannot see whether an input is active at the field cabinet.Per-channel LEDs show physical input and commanded output states locally.
A field voltage transient damages the central alarm controller.Isolated inputs and relays separate remote wiring from the communication electronics.
Network loss leaves the operator believing all remote points are normal.Watchdog and heartbeat monitoring generate a dedicated module-offline alarm.
Aplicaciones típicas
Remote cleanroom alarm zonesUtility equipment contactsGas and leak detector outputsDoor and airlock alarm collection
Parámetros técnicos
Typical construction values for a distributed cleanroom remote alarm I/O module are listed below.
| Materiales Core | FR-4 isolated I/O board with copper relay contacts in flame-retardant polycarbonate DIN-rail housing |
|---|---|
| Panel de espesor | 80-130 mm module depth |
| Ancho efectivo | 45-160 mm DIN-rail width |
| Longitud máxima | Up to 180 mm module height |
| Acero frente a espesor | 0 mm; non-metallic DIN-rail enclosure |
| Densidad Core | 1180-1450 kg/m³ for reinforced polymer housing |
| Conductividad térmica | 0.19-0.35 W / (m · K) para material de recinto de polímero |
| Superficie acabada | Light-gray DIN-rail housing with green input LEDs, red alarm LEDs and blue network label |
| Tipo conjunto | DIN-rail clip with removable input-output terminals and RS-485 or Ethernet connector |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Digital input and relay combinationsModbus RTU or TCPLocal fail-safe logicGasketed field enclosure
Planning a Remote Alarm Module specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
