Complete remote alarm module with gray DIN-rail body, green-red LEDs and blue network label

Kontrol Cleanroom dan Sistem Pemantauan Lingkungan

Modul alarm jarak jauh

A distributed I/O module that collects local alarm contacts, drives remote indicators and reports point status to a cleanroom central alarm or monitoring system.

Isolated Alarm Inputs
Configurable Relay Outputs
Local Point LEDs
Networked Distributed I/O

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The remote alarm module places alarm acquisition close to cleanroom equipment, sensors or utility panels. Isolated digital inputs receive dry contacts or selected voltage states, and local LEDs show channel condition during service. Relay outputs can operate beacons, sounders or shutdown interlocks under central or local logic. RS-485 or Ethernet communication transfers point status, channel diagnostics and output commands to the central system, reducing long individual cable runs from every alarm point.

Fitur utama:

Galvanically isolated inputs protect central electronics from field wiring disturbances.

Local channel LEDs show input and relay state without opening software tools.

Distributed placement reduces the amount of home-run alarm cable across the facility.

Watchdog and communication-fault indication distinguish a network problem from a normal input.

Kekhawatiran produk pelanggan

Distributed alarm I/O must preserve channel identity and reveal communication loss rather than silently freezing the last known state.

Dozens of alarm contacts require long home-run cables to the central panel.A local module aggregates nearby points onto one supervised communication link.

Technicians cannot see whether an input is active at the field cabinet.Per-channel LEDs show physical input and commanded output states locally.

A field voltage transient damages the central alarm controller.Isolated inputs and relays separate remote wiring from the communication electronics.

Network loss leaves the operator believing all remote points are normal.Watchdog and heartbeat monitoring generate a dedicated module-offline alarm.

Aplikasi yang Tipis

Remote cleanroom alarm zonesUtility equipment contactsGas and leak detector outputsDoor and airlock alarm collection

Parameter teknis

Typical construction values for a distributed cleanroom remote alarm I/O module are listed below.

Bahan inti	FR-4 isolated I/O board with copper relay contacts in flame-retardant polycarbonate DIN-rail housing
Ketebalan Panel (Panel Thickness)	80-130 mm module depth
Efektif lebar	45-160 mm DIN-rail width
Panjang maksimum	Up to 180 mm module height
Baja menghadap ketebalan	0 mm; non-metallic DIN-rail enclosure
Kepadatan inti (core density)	1180-1450 kg/m³ for reinforced polymer housing
Konduktivitas Termal (Thermal Conductivity)	0,19 - 0,35 W / (m · K) untuk bahan kandang polimer
Permukaan selesai	Light-gray DIN-rail housing with green input LEDs, red alarm LEDs and blue network label
Jenis Bersama	DIN-rail clip with removable input-output terminals and RS-485 or Ethernet connector
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Digital input and relay combinationsModbus RTU or TCPLocal fail-safe logicGasketed field enclosure

Planning a Remote Alarm Module specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami