Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de utilidad de Cleanroom
Generador de vapor puro
A thermosyphon pure-steam generator that evaporates treated feed water and separates entrained droplets before delivering steam to pharmaceutical sterilization duties.
- Thermosyphon evaporation
- Low-velocity droplet separation
- Automated pressure and level control
Introducción del producto
The Pure Steam Generator uses plant steam or an electric heater to boil treated feed water in a hygienic heat exchanger. Natural circulation carries the two-phase flow into a tall evaporator/decontamination column, where low vapor velocity and vertical separation limit liquid carryover before pure steam leaves the top outlet. Feed-water level and product-steam pressure are regulated as demand changes.
Características clave
Parallel thermosyphon bodies
Vertical decontamination column
Natural-circulation evaporation
Feed-water level transmitter
Pure-steam pressure control
Automatic blowdown interface
Integrated HMI and utility monitoring
Preocupaciones del producto del cliente
Pure-steam production must respond to variable demand while controlling feed-water level, droplet entrainment and non-condensable gases across startup and steady operation.
Rapid demand changes disturb generator pressureModulate primary heat input from product-steam pressure and retain useful steam volume in the evaporator.
Feed-water droplets carry into the steam outletUse a tall low-velocity decontamination column and controlled thermosyphon circulation.
Unstable level exposes the heating surfaceRegulate feed-water admission continuously from the evaporator level transmitter.
Startup gases enter the clean-steam headerProvide controlled venting and warm-up logic before releasing steam to the distribution system.
Aplicaciones típicas
Sterilize-in-Place systemsAutoclave steam supplyAseptic process-equipment sterilizationSterile barrier steamQualified clean-utility humidification
Parámetros técnicos
Steam output, operating pressure, heat source, exchanger area, separator size and controls are selected from peak demand and available utility conditions.
| Materiales Core | 316L stainless steel evaporator, secondary heat-transfer path and pure-steam piping |
|---|---|
| Panel de espesor | Evaporator shell typically 3.0–8.0 mm |
| Ancho efectivo | Packaged skid width typically 1000–2200 mm |
| Longitud máxima | Complete skid height or length typically up to 4000 mm |
| Acero frente a espesor | Control enclosure and skid sheet typically 1.5–3.0 mm |
| Densidad Core | 316L stainless steel density approximately 8000 kg/m³ |
| Conductividad térmica | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| Superficie acabada | Polished pure-steam and feed-water surfaces with satin-finished external stainless steel |
| Tipo conjunto | Orbital-welded sanitary secondary piping with hygienic clamps at instruments and service points |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Plant-steam or electric heatingVariable steam output rangeNon-condensable gas ventingPure-steam condenser interfaceAutomatic blowdownRemote utility monitoringSkid insulation and cladding
Planning a Pure Steam Generator specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
