Pure steam generator three-quarter view with evaporator and thermosyphon heat exchanger

클린룸 유틸리티 시스템

Pure Steam Generator (순수 증기 발생기)

A thermosyphon pure-steam generator that evaporates treated feed water and separates entrained droplets before delivering steam to pharmaceutical sterilization duties.

Thermosyphon evaporation
Low-velocity droplet separation
Automated pressure and level control

견적 요청 제품 찾아보기

상품 소개

The Pure Steam Generator uses plant steam or an electric heater to boil treated feed water in a hygienic heat exchanger. Natural circulation carries the two-phase flow into a tall evaporator/decontamination column, where low vapor velocity and vertical separation limit liquid carryover before pure steam leaves the top outlet. Feed-water level and product-steam pressure are regulated as demand changes.

주요 기능

316L secondary-side construction

Parallel thermosyphon bodies

Vertical decontamination column

Natural-circulation evaporation

Feed-water level transmitter

Pure-steam pressure control

Automatic blowdown interface

Integrated HMI and utility monitoring

고객 제품 관심사

Pure-steam production must respond to variable demand while controlling feed-water level, droplet entrainment and non-condensable gases across startup and steady operation.

Rapid demand changes disturb generator pressureModulate primary heat input from product-steam pressure and retain useful steam volume in the evaporator.

Feed-water droplets carry into the steam outletUse a tall low-velocity decontamination column and controlled thermosyphon circulation.

Unstable level exposes the heating surfaceRegulate feed-water admission continuously from the evaporator level transmitter.

Startup gases enter the clean-steam headerProvide controlled venting and warm-up logic before releasing steam to the distribution system.

일반적인 응용 프로그램

Sterilize-in-Place systemsAutoclave steam supplyAseptic process-equipment sterilizationSterile barrier steamQualified clean-utility humidification

기술 매개변수

Steam output, operating pressure, heat source, exchanger area, separator size and controls are selected from peak demand and available utility conditions.

핵심 재료	316L stainless steel evaporator, secondary heat-transfer path and pure-steam piping
패널 두께	Evaporator shell typically 3.0–8.0 mm
유효 폭	Packaged skid width typically 1000–2200 mm
최대 길이	Complete skid height or length typically up to 4000 mm
강철 면면 두께	Control enclosure and skid sheet typically 1.5–3.0 mm
코어 밀도	316L stainless steel density approximately 8000 kg/m³
열전도도 (Thermal Conductivity)	316L stainless steel approximately 15 W/(m·K) at ambient temperature
표면 마무리	Polished pure-steam and feed-water surfaces with satin-finished external stainless steel
접합 유형	Orbital-welded sanitary secondary piping with hygienic clamps at instruments and service points
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Plant-steam or electric heatingVariable steam output rangeNon-condensable gas ventingPure-steam condenser interfaceAutomatic blowdownRemote utility monitoringSkid insulation and cladding

Planning a Pure Steam Generator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.