Pure steam generator three-quarter view with evaporator and thermosyphon heat exchanger

クリーンルームユーティリティシステム

純粋な蒸気発生器

A thermosyphon pure-steam generator that evaporates treated feed water and separates entrained droplets before delivering steam to pharmaceutical sterilization duties.

Thermosyphon evaporation
Low-velocity droplet separation
Automated pressure and level control

見積もりリクエスト製品案内

商品紹介

The Pure Steam Generator uses plant steam or an electric heater to boil treated feed water in a hygienic heat exchanger. Natural circulation carries the two-phase flow into a tall evaporator/decontamination column, where low vapor velocity and vertical separation limit liquid carryover before pure steam leaves the top outlet. Feed-water level and product-steam pressure are regulated as demand changes.

主要な特徴

316L secondary-side construction

Parallel thermosyphon bodies

Vertical decontamination column

Natural-circulation evaporation

Feed-water level transmitter

Pure-steam pressure control

Automatic blowdown interface

Integrated HMI and utility monitoring

お客様の製品に関する懸念事項

Pure-steam production must respond to variable demand while controlling feed-water level, droplet entrainment and non-condensable gases across startup and steady operation.

Rapid demand changes disturb generator pressureModulate primary heat input from product-steam pressure and retain useful steam volume in the evaporator.

Feed-water droplets carry into the steam outletUse a tall low-velocity decontamination column and controlled thermosyphon circulation.

Unstable level exposes the heating surfaceRegulate feed-water admission continuously from the evaporator level transmitter.

Startup gases enter the clean-steam headerProvide controlled venting and warm-up logic before releasing steam to the distribution system.

典型的な用途

Sterilize-in-Place systemsAutoclave steam supplyAseptic process-equipment sterilizationSterile barrier steamQualified clean-utility humidification

技術的なパラメータ

Steam output, operating pressure, heat source, exchanger area, separator size and controls are selected from peak demand and available utility conditions.

コア材料	316L stainless steel evaporator, secondary heat-transfer path and pure-steam piping
パネルの厚さ	Evaporator shell typically 3.0–8.0 mm
有効幅	Packaged skid width typically 1000–2200 mm
最大長さ	Complete skid height or length typically up to 4000 mm
鋼鉄の厚さを直面する	Control enclosure and skid sheet typically 1.5–3.0 mm
コア密度	316L stainless steel density approximately 8000 kg/m³
熱伝導率	316L stainless steel approximately 15 W/(m·K) at ambient temperature
表面仕上げ	Polished pure-steam and feed-water surfaces with satin-finished external stainless steel
ジョイントタイプ	Orbital-welded sanitary secondary piping with hygienic clamps at instruments and service points
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Plant-steam or electric heatingVariable steam output rangeNon-condensable gas ventingPure-steam condenser interfaceAutomatic blowdownRemote utility monitoringSkid insulation and cladding

Planning a Pure Steam Generator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する