Pure steam generator three-quarter view with evaporator and thermosyphon heat exchanger

Sistem Utilitas Cleanroom

Generator Uap Murni Murni

A thermosyphon pure-steam generator that evaporates treated feed water and separates entrained droplets before delivering steam to pharmaceutical sterilization duties.

Thermosyphon evaporation
Low-velocity droplet separation
Automated pressure and level control

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Pure Steam Generator uses plant steam or an electric heater to boil treated feed water in a hygienic heat exchanger. Natural circulation carries the two-phase flow into a tall evaporator/decontamination column, where low vapor velocity and vertical separation limit liquid carryover before pure steam leaves the top outlet. Feed-water level and product-steam pressure are regulated as demand changes.

Fitur utama:

316L secondary-side construction

Parallel thermosyphon bodies

Vertical decontamination column

Natural-circulation evaporation

Feed-water level transmitter

Pure-steam pressure control

Automatic blowdown interface

Integrated HMI and utility monitoring

Kekhawatiran produk pelanggan

Pure-steam production must respond to variable demand while controlling feed-water level, droplet entrainment and non-condensable gases across startup and steady operation.

Rapid demand changes disturb generator pressureModulate primary heat input from product-steam pressure and retain useful steam volume in the evaporator.

Feed-water droplets carry into the steam outletUse a tall low-velocity decontamination column and controlled thermosyphon circulation.

Unstable level exposes the heating surfaceRegulate feed-water admission continuously from the evaporator level transmitter.

Startup gases enter the clean-steam headerProvide controlled venting and warm-up logic before releasing steam to the distribution system.

Aplikasi yang Tipis

Sterilize-in-Place systemsAutoclave steam supplyAseptic process-equipment sterilizationSterile barrier steamQualified clean-utility humidification

Parameter teknis

Steam output, operating pressure, heat source, exchanger area, separator size and controls are selected from peak demand and available utility conditions.

Bahan inti	316L stainless steel evaporator, secondary heat-transfer path and pure-steam piping
Ketebalan Panel (Panel Thickness)	Evaporator shell typically 3.0–8.0 mm
Efektif lebar	Packaged skid width typically 1000–2200 mm
Panjang maksimum	Complete skid height or length typically up to 4000 mm
Baja menghadap ketebalan	Control enclosure and skid sheet typically 1.5–3.0 mm
Kepadatan inti (core density)	316L stainless steel kepadatan sekitar 8000 kg / m3
Konduktivitas Termal (Thermal Conductivity)	316L stainless steel sekitar 15 W / (m · K) pada suhu ambien
Permukaan selesai	Polished pure-steam and feed-water surfaces with satin-finished external stainless steel
Jenis Bersama	Orbital-welded sanitary secondary piping with hygienic clamps at instruments and service points
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Plant-steam or electric heatingVariable steam output rangeNon-condensable gas ventingPure-steam condenser interfaceAutomatic blowdownRemote utility monitoringSkid insulation and cladding

Planning a Pure Steam Generator specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami