Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Perfil de cubierta de sala limpia interna
A radiused two-part aluminum cove that replaces a sharp internal junction with a smooth, cleanable transition inside controlled rooms.
- Smooth 50 mm internal radius
- Two-part clip-on construction
- Cleanable powder-coated surface
- Suitable for wall, floor and ceiling junctions
Introducción del producto
The Internal Cleanroom Coving Profile forms a continuous concave radius where two room surfaces meet. A concealed backing section is fixed first, then the finished cove face clips into position to cover fasteners and bridge the junction. The rounded geometry makes wiping easier than a tight square corner and can remain in place while compatible wall panels are removed from nearby bays.
Características clave
A separate backing channel keeps primary fixings behind the finished face.
Clip-on assembly creates an even exposed line along long room junctions.
Powder-coated aluminum tolerates routine wipe-down cleaning.
Matching end caps and three-way pieces can finish intersecting cove runs.
Preocupaciones del producto del cliente
Sharp internal corners are awkward to wipe, visually emphasize sealant irregularities and can collect residue at the meeting point of two surfaces.
Cleaning cloths cannot maintain full contact inside a tight 90-degree recess.A 50 mm concave radius creates a broad, accessible wiping path.
Exposed fixings interrupt the surface at a hygiene-critical junction.The finished cove snaps over its backing channel and conceals the attachment points.
Hand-formed corner sealant often varies in width and appearance.A factory-extruded face establishes a uniform radius along the entire run.
Complex corner intersections require improvised cuts that are hard to seal neatly.Compatible end, internal and three-way accessories provide shaped termination pieces.
Aplicaciones típicas
Wall-to-ceiling cleanroom junctionsWall-to-wall internal cornersWall-to-floor perimeter transitionsHygienic laboratory interiorsPharmaceutical processing rooms
Parámetros técnicos
This profile is a finishing component rather than an insulated panel. Its defining dimension is the internal radius and its material properties come from the aluminum extrusion.
| Materiales Core | Two-part 6063 aluminum backing channel and cove face |
|---|---|
| Panel de espesor | N/A — not applicable to an internal coving profile |
| Ancho efectivo | 50 mm standard internal cove radius |
| Longitud máxima | 3000 mm |
| Acero frente a espesor | N/A — the profile is extruded aluminum |
| Densidad Core | N/A — no insulated core; aluminum alloy density is approximately 2700 kg/m³ |
| Conductividad térmica | N/A — no insulated core; aluminum alloy is approximately 200 W/(m·K) |
| Superficie acabada | White polyester powder-coated or clear anodized |
| Tipo conjunto | Snap-on cove face over a concealed backing channel with sealed edges |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
50 mm radius internal coveAlternative 75 mm radiusThree-way internal corner pieceEnd caps and matching sealed transitions
Planning a Internal Cleanroom Coving Profile specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
