Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia piezas de repuesto
Control de velocidad FFU
A compact panel-mounted controller that gives operators direct, stepless airflow adjustment for compatible EC-motor fan filter units.
- Stepless Manual Adjustment
- EC Fan Signal Control
- Compact Panel Mounting
- Serviceable Screw Terminals
Introducción del producto
The FFU speed controller provides a local setpoint for a compatible electronically commutated fan motor. Turning the front potentiometer varies the low-voltage command used by the motor electronics, allowing commissioning or maintenance personnel to trim airflow without replacing the FFU drive. The molded enclosure protects the control components, while mounting ears and a removable screw terminal block simplify installation near the fan housing or inside a control compartment. Signal range, terminal assignment and minimum-speed behavior must be matched to the existing motor or FFU control card.
Características clave
Low-voltage signal architecture is suited to EC fans that accept an analog speed command.
Front status indication provides a quick visual check that the control circuit is energized.
Screw terminals and external mounting tabs support straightforward replacement and servicing.
Preocupaciones del producto del cliente
A replacement speed controller must produce the signal expected by the installed motor and fit the existing wiring and mounting arrangement.
The new controller uses a signal range that the existing EC motor cannot interpret correctly.The controller is selected to match the motor's specified analog command range and reference supply.
Airflow falls below the stable operating point at the lowest dial position.Minimum-speed behavior can be matched or preset to preserve the required lower airflow limit.
Different terminal assignments create wiring errors during field replacement.Terminal count, signal common, reference voltage and command output are verified against the original connection diagram.
The control cannot be secured near the FFU without modifying the housing.Mounting-tab geometry and enclosure orientation can be configured for the available service space.
Aplicaciones típicas
Single FFU airflow commissioningCleanroom ceiling fan filter unitsLaminar-flow workstation fansLocal EC fan maintenance control
Parámetros técnicos
Typical construction ranges for compact manual FFU speed controllers are shown below.
| Materiales Core | Flame-retardant PC/ABS enclosure with FR-4 control board and copper-alloy terminals |
|---|---|
| Panel de espesor | 35-70 mm nominal enclosure depth |
| Ancho efectivo | 70-135 mm nominal mounting width |
| Longitud máxima | Up to 160 mm overall length including mounting tabs |
| Acero frente a espesor | 0.8-1.5 mm equivalent terminal-clamp and internal bracket thickness |
| Densidad Core | 1050-1250 kg/m³ for molded PC/ABS enclosure material |
| Conductividad térmica | 0.18-0.25 W/(m·K) for molded enclosure material |
| Superficie acabada | Fine-textured matte-black housing with white dial marks, green indicator and green terminal block |
| Tipo conjunto | Six-position screw terminal connection with bolted external mounting tabs |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
0-10 V or matched potentiometer interfaceMinimum-speed presetAlternative terminal assignmentCustom mounting-tab geometry
Planning a FFU Speed Controller specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
