Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Equipment Ersatzteile
FFU Speed Controller
A compact panel-mounted controller that gives operators direct, stepless airflow adjustment for compatible EC-motor fan filter units.
- Stepless Manual Adjustment
- EC Fan Signal Control
- Compact Panel Mounting
- Serviceable Screw Terminals
Produkteinführung
The FFU speed controller provides a local setpoint for a compatible electronically commutated fan motor. Turning the front potentiometer varies the low-voltage command used by the motor electronics, allowing commissioning or maintenance personnel to trim airflow without replacing the FFU drive. The molded enclosure protects the control components, while mounting ears and a removable screw terminal block simplify installation near the fan housing or inside a control compartment. Signal range, terminal assignment and minimum-speed behavior must be matched to the existing motor or FFU control card.
Key Features
Low-voltage signal architecture is suited to EC fans that accept an analog speed command.
Front status indication provides a quick visual check that the control circuit is energized.
Screw terminals and external mounting tabs support straightforward replacement and servicing.
Kunden Produktbedenken
A replacement speed controller must produce the signal expected by the installed motor and fit the existing wiring and mounting arrangement.
The new controller uses a signal range that the existing EC motor cannot interpret correctly.The controller is selected to match the motor's specified analog command range and reference supply.
Airflow falls below the stable operating point at the lowest dial position.Minimum-speed behavior can be matched or preset to preserve the required lower airflow limit.
Different terminal assignments create wiring errors during field replacement.Terminal count, signal common, reference voltage and command output are verified against the original connection diagram.
The control cannot be secured near the FFU without modifying the housing.Mounting-tab geometry and enclosure orientation can be configured for the available service space.
Typische Anwendungen
Single FFU airflow commissioningCleanroom ceiling fan filter unitsLaminar-flow workstation fansLocal EC fan maintenance control
Technische Parameter
Typical construction ranges for compact manual FFU speed controllers are shown below.
| Core Material | Flame-retardant PC/ABS enclosure with FR-4 control board and copper-alloy terminals |
|---|---|
| Panel Dicke | 35-70 mm nominal enclosure depth |
| Effektive Breite | 70-135 mm nominal mounting width |
| Maximale Länge | Up to 160 mm overall length including mounting tabs |
| Stahl facing Dicke | 0.8-1.5 mm equivalent terminal-clamp and internal bracket thickness |
| Kerndichte | 1050-1250 kg/m³ for molded PC/ABS enclosure material |
| Thermische Leitfähigkeit | 0.18-0.25 W/(m·K) for molded enclosure material |
| Oberfläche Finish | Fine-textured matte-black housing with white dial marks, green indicator and green terminal block |
| Gemeinsamer Typ | Six-position screw terminal connection with bolted external mounting tabs |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
0-10 V or matched potentiometer interfaceMinimum-speed presetAlternative terminal assignmentCustom mounting-tab geometry
Planning a FFU Speed Controller specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
