Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Bomba de agua de enfriamiento Set
A horizontal split-case centrifugal pump engineered for the high flow and moderate head required between chillers and cooling towers.
- High-Flow Double-Suction Design
- Balanced Axial Loading
- Split-Casing Access
- Heavy-Duty Bearing Support
Introducción del producto
The cooling-water pump uses a horizontally split cast-iron casing around a double-suction impeller. Water enters both sides of the impeller, reducing axial thrust and supporting large condenser-water flows with stable bearing loads. The upper casing half can be removed to inspect the impeller, wear rings and shaft without separating the lower casing from the main pipework.
Características clave
A double-volute casing balances radial forces through a broad operating range.
The horizontal split line exposes internal wear components while suction and discharge flanges stay connected.
Independent bearing housings and a rigid base suit continuous cooling-tower circulation duty.
Preocupaciones del producto del cliente
Condenser-water pumps must carry large flow continuously while tolerating treated water and service interruptions.
High inlet velocity causes cavitation and unstable vibration.Double-suction entry shares flow between two impeller eyes and improves suction behavior.
Large impellers generate high radial and axial bearing loads.Balanced double-volute and double-suction geometry reduces shaft loading.
Inspecting a conventional volute requires cutting connected pipework.The removable upper casing exposes the rotating assembly while lower flanges remain installed.
Cooling-tower water attacks unsuitable internal materials.Coated cast iron, bronze or stainless wear components can be selected for the treatment program.
Aplicaciones típicas
Chiller condenser-water circulationCooling-tower distribution headersLarge pharmaceutical utility plantsData-center heat-rejection loopsIndustrial process cooling
Parámetros técnicos
Representative split-case condenser-water pump construction data are listed below.
| Materiales Core | Split cast-iron casing with bronze or stainless double-suction impeller |
|---|---|
| Panel de espesor | 12-25 mm fabricated steel baseplate thickness |
| Ancho efectivo | 600-1800 mm typical pump-set width |
| Longitud máxima | Up to 4200 mm including motor and coupling |
| Acero frente a espesor | 2.0-3.0 mm removable coupling guard |
| Densidad Core | Approximately 7000-7300 kg/m³ for split cast-iron casing material |
| Conductividad térmica | Approximately 45-55 W/(m·K) for cast-iron casing material |
| Superficie acabada | Dark-green epoxy coating with zinc-rich primer on wetted exterior |
| Tipo conjunto | Horizontally bolted split casing, flanged water ports and flexible shaft coupling |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Bronze-fitted or stainless rotating assemblyPacked gland or mechanical sealFixed-speed or variable-speed motorBase-mounted duty-standby packaged pair
Planning a Cooling-Water Pump Set specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
