Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum HVAC und Luftbehandlung Ausrüstung
Kühlwasser-Pump Set
A horizontal split-case centrifugal pump engineered for the high flow and moderate head required between chillers and cooling towers.
- High-Flow Double-Suction Design
- Balanced Axial Loading
- Split-Casing Access
- Heavy-Duty Bearing Support
Produkteinführung
The cooling-water pump uses a horizontally split cast-iron casing around a double-suction impeller. Water enters both sides of the impeller, reducing axial thrust and supporting large condenser-water flows with stable bearing loads. The upper casing half can be removed to inspect the impeller, wear rings and shaft without separating the lower casing from the main pipework.
Key Features
A double-volute casing balances radial forces through a broad operating range.
The horizontal split line exposes internal wear components while suction and discharge flanges stay connected.
Independent bearing housings and a rigid base suit continuous cooling-tower circulation duty.
Kunden Produktbedenken
Condenser-water pumps must carry large flow continuously while tolerating treated water and service interruptions.
High inlet velocity causes cavitation and unstable vibration.Double-suction entry shares flow between two impeller eyes and improves suction behavior.
Large impellers generate high radial and axial bearing loads.Balanced double-volute and double-suction geometry reduces shaft loading.
Inspecting a conventional volute requires cutting connected pipework.The removable upper casing exposes the rotating assembly while lower flanges remain installed.
Cooling-tower water attacks unsuitable internal materials.Coated cast iron, bronze or stainless wear components can be selected for the treatment program.
Typische Anwendungen
Chiller condenser-water circulationCooling-tower distribution headersLarge pharmaceutical utility plantsData-center heat-rejection loopsIndustrial process cooling
Technische Parameter
Representative split-case condenser-water pump construction data are listed below.
| Core Material | Split cast-iron casing with bronze or stainless double-suction impeller |
|---|---|
| Panel Dicke | 12-25 mm fabricated steel baseplate thickness |
| Effektive Breite | 600-1800 mm typical pump-set width |
| Maximale Länge | Up to 4200 mm including motor and coupling |
| Stahl facing Dicke | 2.0-3.0 mm removable coupling guard |
| Kerndichte | Approximately 7000-7300 kg/m³ for split cast-iron casing material |
| Thermische Leitfähigkeit | Approximately 45-55 W/(m·K) for cast-iron casing material |
| Oberfläche Finish | Dark-green epoxy coating with zinc-rich primer on wetted exterior |
| Gemeinsamer Typ | Horizontally bolted split casing, flanged water ports and flexible shaft coupling |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Bronze-fitted or stainless rotating assemblyPacked gland or mechanical sealFixed-speed or variable-speed motorBase-mounted duty-standby packaged pair
Planning a Cooling-Water Pump Set specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
