Green horizontal split-case cooling-water pump set

Bilik Bersih HVAC dan Peralatan Pengendalian Udara

Set pam penyejukan-air

A horizontal split-case centrifugal pump engineered for the high flow and moderate head required between chillers and cooling towers.

High-Flow Double-Suction Design
Balanced Axial Loading
Split-Casing Access
Heavy-Duty Bearing Support

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cooling-water pump uses a horizontally split cast-iron casing around a double-suction impeller. Water enters both sides of the impeller, reducing axial thrust and supporting large condenser-water flows with stable bearing loads. The upper casing half can be removed to inspect the impeller, wear rings and shaft without separating the lower casing from the main pipework.

Ciri-ciri Utama

Double-suction hydraulics divide inlet flow across both impeller eyes and reduce inlet velocity.

A double-volute casing balances radial forces through a broad operating range.

The horizontal split line exposes internal wear components while suction and discharge flanges stay connected.

Independent bearing housings and a rigid base suit continuous cooling-tower circulation duty.

Kebimbangan Produk Pelanggan

Condenser-water pumps must carry large flow continuously while tolerating treated water and service interruptions.

High inlet velocity causes cavitation and unstable vibration.Double-suction entry shares flow between two impeller eyes and improves suction behavior.

Large impellers generate high radial and axial bearing loads.Balanced double-volute and double-suction geometry reduces shaft loading.

Inspecting a conventional volute requires cutting connected pipework.The removable upper casing exposes the rotating assembly while lower flanges remain installed.

Cooling-tower water attacks unsuitable internal materials.Coated cast iron, bronze or stainless wear components can be selected for the treatment program.

Permohonan yang biasa

Chiller condenser-water circulationCooling-tower distribution headersLarge pharmaceutical utility plantsData-center heat-rejection loopsIndustrial process cooling

Parameter teknikal

Representative split-case condenser-water pump construction data are listed below.

Bahan Teras	Split cast-iron casing with bronze or stainless double-suction impeller
Ketebalan Panel	12-25 mm fabricated steel baseplate thickness
Lebar berkesan	600-1800 mm typical pump-set width
Panjang maksimum	Up to 4200 mm including motor and coupling
Keluli Menghadapi Ketebalan	2.0-3.0 mm removable coupling guard
Ketumpatan teras	Approximately 7000-7300 kg/m³ for split cast-iron casing material
Kekonduksian Terma	Approximately 45-55 W/(m·K) for cast-iron casing material
Kemasan permukaan	Dark-green epoxy coating with zinc-rich primer on wetted exterior
Jenis Bersatu	Horizontally bolted split casing, flanged water ports and flexible shaft coupling
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Bronze-fitted or stainless rotating assemblyPacked gland or mechanical sealFixed-speed or variable-speed motorBase-mounted duty-standby packaged pair

Planning a Cooling-Water Pump Set specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami