Green horizontal split-case cooling-water pump set

클린룸 HVAC 및 공기 처리 장비

냉각수 펌프 세트

A horizontal split-case centrifugal pump engineered for the high flow and moderate head required between chillers and cooling towers.

High-Flow Double-Suction Design
Balanced Axial Loading
Split-Casing Access
Heavy-Duty Bearing Support

견적 요청 제품 찾아보기

상품 소개

The cooling-water pump uses a horizontally split cast-iron casing around a double-suction impeller. Water enters both sides of the impeller, reducing axial thrust and supporting large condenser-water flows with stable bearing loads. The upper casing half can be removed to inspect the impeller, wear rings and shaft without separating the lower casing from the main pipework.

주요 기능

Double-suction hydraulics divide inlet flow across both impeller eyes and reduce inlet velocity.

A double-volute casing balances radial forces through a broad operating range.

The horizontal split line exposes internal wear components while suction and discharge flanges stay connected.

Independent bearing housings and a rigid base suit continuous cooling-tower circulation duty.

고객 제품 관심사

Condenser-water pumps must carry large flow continuously while tolerating treated water and service interruptions.

High inlet velocity causes cavitation and unstable vibration.Double-suction entry shares flow between two impeller eyes and improves suction behavior.

Large impellers generate high radial and axial bearing loads.Balanced double-volute and double-suction geometry reduces shaft loading.

Inspecting a conventional volute requires cutting connected pipework.The removable upper casing exposes the rotating assembly while lower flanges remain installed.

Cooling-tower water attacks unsuitable internal materials.Coated cast iron, bronze or stainless wear components can be selected for the treatment program.

일반적인 응용 프로그램

Chiller condenser-water circulationCooling-tower distribution headersLarge pharmaceutical utility plantsData-center heat-rejection loopsIndustrial process cooling

기술 매개변수

Representative split-case condenser-water pump construction data are listed below.

핵심 재료	Split cast-iron casing with bronze or stainless double-suction impeller
패널 두께	12-25 mm fabricated steel baseplate thickness
유효 폭	600-1800 mm typical pump-set width
최대 길이	Up to 4200 mm including motor and coupling
강철 면면 두께	2.0-3.0 mm removable coupling guard
코어 밀도	Approximately 7000-7300 kg/m³ for split cast-iron casing material
열전도도 (Thermal Conductivity)	Approximately 45-55 W/(m·K) for cast-iron casing material
표면 마무리	Dark-green epoxy coating with zinc-rich primer on wetted exterior
접합 유형	Horizontally bolted split casing, flanged water ports and flexible shaft coupling
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Bronze-fitted or stainless rotating assemblyPacked gland or mechanical sealFixed-speed or variable-speed motorBase-mounted duty-standby packaged pair

Planning a Cooling-Water Pump Set specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.