Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de distribución de aire para salas limpias
Habitación terminal HEPA
A fully welded ceiling housing that secures a terminal HEPA or ULPA filter against a continuous sealed seat and preserves room-side service access.
- Fully Welded Air Path
- Gasket or Gel Filter Seat
- Room-Side Clamping
- Aerosol Test Connections
Introducción del producto
The cleanroom HEPA terminal housing is the pressure-containing enclosure behind a final ceiling filter. Its welded stainless-steel or coated-steel shell includes the duct inlet, filter seal surface, clamping mechanism and service test ports but allows the diffuser face and filter type to be selected separately. A smooth interior avoids exposed acoustic material and makes the upstream chamber accessible for cleaning when the filter is removed. The housing can serve supply or extract terminals and can be integrated into modular, walkable or gypsum ceilings with a matching perimeter frame.
Características clave
Adjustable room-side clamps distribute loading around gasket-seal or gel-seal filter frames.
Separate aerosol injection, upstream sampling and pressure ports support repeatable filter checks.
Multiple ceiling frames allow the same housing concept to fit T-grid, panel or hard-ceiling construction.
Preocupaciones del producto del cliente
The housing must protect the final-filter seal from duct pressure, ceiling movement and repeated filter changes while retaining a clean internal air path.
Folded casing seams leak upstream air around the filter.A continuously welded shell creates one pressure-tight path from the duct inlet to the seal seat.
Uneven clamps distort the filter frame and compress one side of the gasket more than another.Distributed adjustable retainers apply balanced room-side loading around the filter perimeter.
Testing hoses and instruments cannot connect without removing the diffuser.Accessible capped ports separate aerosol, sample and pressure functions at the terminal face.
A housing flange leaves ledges around a hard cleanroom ceiling.Flush perimeter frame variants close neatly to T-grid, sandwich-panel or sealed gypsum ceilings.
Aplicaciones típicas
Terminal filtration above sterile manufacturing roomsFinal exhaust filtration in containment support areasHospital clean ventilation ceilingsLaboratory HEPA supply branchesMicroelectronics cleanroom ceiling grids
Parámetros técnicos
Representative material and size ranges for welded cleanroom terminal filter housings are listed below.
| Materiales Core | Fully welded 304 stainless steel or epoxy-coated steel with stainless filter clamps and polymer seal channel |
|---|---|
| Panel de espesor | 0.8–1.5 mm welded housing panels |
| Ancho efectivo | 305–610 mm nominal terminal filter width |
| Longitud máxima | Up to 1220 mm for rectangular ceiling housings |
| Acero frente a espesor | 0.8–1.5 mm housing sheet and 1.5–2.0 mm perimeter flange |
| Densidad Core | Approximately 8000 kg/m³ for 304 stainless-steel housing construction |
| Conductividad térmica | Approximately 14–16 W/(m·K) for 304 stainless-steel housing construction |
| Superficie acabada | Smooth bead-blasted or electropolished stainless steel, or white epoxy powder coating |
| Tipo conjunto | Continuously welded shell with gasket- or gel-seal filter channel and flanged duct inlet |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
304 or 316L stainless-steel constructionGasket-seal or liquid-gel filter interfaceTop or side duct connectionT-grid, panel-ceiling or hard-ceiling perimeter frame
Planning a Cleanroom HEPA Terminal Housing specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
