Welded cleanroom HEPA terminal housing with top round duct inlet

클린룸 공기 분배 시스템

클린룸 HEPA 터미널 하우징

A fully welded ceiling housing that secures a terminal HEPA or ULPA filter against a continuous sealed seat and preserves room-side service access.

Fully Welded Air Path
Gasket or Gel Filter Seat
Room-Side Clamping
Aerosol Test Connections

견적 요청 제품 찾아보기

상품 소개

The cleanroom HEPA terminal housing is the pressure-containing enclosure behind a final ceiling filter. Its welded stainless-steel or coated-steel shell includes the duct inlet, filter seal surface, clamping mechanism and service test ports but allows the diffuser face and filter type to be selected separately. A smooth interior avoids exposed acoustic material and makes the upstream chamber accessible for cleaning when the filter is removed. The housing can serve supply or extract terminals and can be integrated into modular, walkable or gypsum ceilings with a matching perimeter frame.

주요 기능

Continuously welded seams eliminate folded casing joints that could become untreated-air bypass paths.

Adjustable room-side clamps distribute loading around gasket-seal or gel-seal filter frames.

Separate aerosol injection, upstream sampling and pressure ports support repeatable filter checks.

Multiple ceiling frames allow the same housing concept to fit T-grid, panel or hard-ceiling construction.

고객 제품 관심사

The housing must protect the final-filter seal from duct pressure, ceiling movement and repeated filter changes while retaining a clean internal air path.

Folded casing seams leak upstream air around the filter.A continuously welded shell creates one pressure-tight path from the duct inlet to the seal seat.

Uneven clamps distort the filter frame and compress one side of the gasket more than another.Distributed adjustable retainers apply balanced room-side loading around the filter perimeter.

Testing hoses and instruments cannot connect without removing the diffuser.Accessible capped ports separate aerosol, sample and pressure functions at the terminal face.

A housing flange leaves ledges around a hard cleanroom ceiling.Flush perimeter frame variants close neatly to T-grid, sandwich-panel or sealed gypsum ceilings.

일반적인 응용 프로그램

Terminal filtration above sterile manufacturing roomsFinal exhaust filtration in containment support areasHospital clean ventilation ceilingsLaboratory HEPA supply branchesMicroelectronics cleanroom ceiling grids

기술 매개변수

Representative material and size ranges for welded cleanroom terminal filter housings are listed below.

핵심 재료	Fully welded 304 stainless steel or epoxy-coated steel with stainless filter clamps and polymer seal channel
패널 두께	0.8–1.5 mm welded housing panels
유효 폭	305–610 mm nominal terminal filter width
최대 길이	Up to 1220 mm for rectangular ceiling housings
강철 면면 두께	0.8–1.5 mm housing sheet and 1.5–2.0 mm perimeter flange
코어 밀도	Approximately 8000 kg/m³ for 304 stainless-steel housing construction
열전도도 (Thermal Conductivity)	Approximately 14–16 W/(m·K) for 304 stainless-steel housing construction
표면 마무리	Smooth bead-blasted or electropolished stainless steel, or white epoxy powder coating
접합 유형	Continuously welded shell with gasket- or gel-seal filter channel and flanged duct inlet
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

304 or 316L stainless-steel constructionGasket-seal or liquid-gel filter interfaceTop or side duct connectionT-grid, panel-ceiling or hard-ceiling perimeter frame

Planning a Cleanroom HEPA Terminal Housing specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.