Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Cleanroom Downlight
A compact recessed LED downlight with a flush sealed trim for local illumination where a full-size ceiling panel light is unnecessary.
- Compact Recessed Aperture
- Flush Round or Square Trim
- Multiple Beam Distributions
- Sealed Optical Window
Introducción del producto
The downlight places a compact LED module and reflector above a small ceiling aperture. A broad flush trim compresses a gasket against the cleanroom panel, while a clear or opal window seals the reflector and LED source from the room. Interchangeable optics can produce narrow task illumination or a wider general beam without changing the cleanable exposed geometry.
Características clave
A flush bezel covers the cut edge and creates a simple wipeable face.
Interchangeable reflectors tailor beam spread to work stations or corridors.
The sealed lens protects the recessed optical chamber from room contamination.
A remote driver option reduces heat and service depth at the aperture.
Preocupaciones del producto del cliente
Compact task lighting often leaves an open reflector and rough ceiling cutout exposed to the controlled room.
An open downlight reflector collects dust above the ceiling line.A clear or opal front window seals the complete optical aperture.
A narrow trim does not cover an imperfect ceiling cut.The overlapping sanitary bezel conceals and seals the panel edge.
One fixed beam either over-lights a spot or wastes light outside it.Selectable narrow, medium and wide optics match the local task footprint.
A deep integral driver conflicts with shallow plenum services.The driver can be located remotely with only the compact LED module at the opening.
Aplicaciones típicas
Airlock accent lightingEquipment task zonesCleanroom vestibulesLaboratory counters
Parámetros técnicos
Typical configurable construction ranges for a sealed cleanroom LED downlight are listed below.
| Materiales Core | Die-cast aluminum LED module with reflector, sealed polycarbonate lens and formed steel or aluminum trim |
|---|---|
| Panel de espesor | 60-140 mm recessed body depth |
| Ancho efectivo | 100-220 mm visible trim diameter or width |
| Longitud máxima | Up to 250 mm complete recessed housing length |
| Acero frente a espesor | 0.8-1.2 mm formed sheet-steel back box where selected |
| Densidad Core | Approximately 2700 kg/m³ for the aluminum LED heat-sink body |
| Conductividad térmica | 160-205 W/(m·K) for the aluminum heat sink |
| Superficie acabada | White powder-coated flush trim with clear, opal or prismatic sealed lens |
| Tipo conjunto | Overlapping recessed bezel with continuous gasket, spring or screw retention and sealed lens cup |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Round or square apertureNarrow, medium or wide beamFixed or adjustable optical moduleNative amber or red LED
Planning a Cleanroom Downlight specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
