Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Beleuchtung und elektrische Ausrüstung
Cleanroom Downlight
A compact recessed LED downlight with a flush sealed trim for local illumination where a full-size ceiling panel light is unnecessary.
- Compact Recessed Aperture
- Flush Round or Square Trim
- Multiple Beam Distributions
- Sealed Optical Window
Produkteinführung
The downlight places a compact LED module and reflector above a small ceiling aperture. A broad flush trim compresses a gasket against the cleanroom panel, while a clear or opal window seals the reflector and LED source from the room. Interchangeable optics can produce narrow task illumination or a wider general beam without changing the cleanable exposed geometry.
Key Features
A flush bezel covers the cut edge and creates a simple wipeable face.
Interchangeable reflectors tailor beam spread to work stations or corridors.
The sealed lens protects the recessed optical chamber from room contamination.
A remote driver option reduces heat and service depth at the aperture.
Kunden Produktbedenken
Compact task lighting often leaves an open reflector and rough ceiling cutout exposed to the controlled room.
An open downlight reflector collects dust above the ceiling line.A clear or opal front window seals the complete optical aperture.
A narrow trim does not cover an imperfect ceiling cut.The overlapping sanitary bezel conceals and seals the panel edge.
One fixed beam either over-lights a spot or wastes light outside it.Selectable narrow, medium and wide optics match the local task footprint.
A deep integral driver conflicts with shallow plenum services.The driver can be located remotely with only the compact LED module at the opening.
Typische Anwendungen
Airlock accent lightingEquipment task zonesCleanroom vestibulesLaboratory counters
Technische Parameter
Typical configurable construction ranges for a sealed cleanroom LED downlight are listed below.
| Core Material | Die-cast aluminum LED module with reflector, sealed polycarbonate lens and formed steel or aluminum trim |
|---|---|
| Panel Dicke | 60-140 mm recessed body depth |
| Effektive Breite | 100-220 mm visible trim diameter or width |
| Maximale Länge | Up to 250 mm complete recessed housing length |
| Stahl facing Dicke | 0.8-1.2 mm formed sheet-steel back box where selected |
| Kerndichte | Approximately 2700 kg/m³ for the aluminum LED heat-sink body |
| Thermische Leitfähigkeit | 160-205 W/(m·K) for the aluminum heat sink |
| Oberfläche Finish | White powder-coated flush trim with clear, opal or prismatic sealed lens |
| Gemeinsamer Typ | Overlapping recessed bezel with continuous gasket, spring or screw retention and sealed lens cup |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Round or square apertureNarrow, medium or wide beamFixed or adjustable optical moduleNative amber or red LED
Planning a Cleanroom Downlight specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
