Sealed cleanroom LED downlight with white round flush trim

클린룸 조명 및 전기 장비

클린룸 다운라이트

A compact recessed LED downlight with a flush sealed trim for local illumination where a full-size ceiling panel light is unnecessary.

Compact Recessed Aperture
Flush Round or Square Trim
Multiple Beam Distributions
Sealed Optical Window

견적 요청 제품 찾아보기

상품 소개

The downlight places a compact LED module and reflector above a small ceiling aperture. A broad flush trim compresses a gasket against the cleanroom panel, while a clear or opal window seals the reflector and LED source from the room. Interchangeable optics can produce narrow task illumination or a wider general beam without changing the cleanable exposed geometry.

주요 기능

The small aperture preserves ceiling area for filters and services.

A flush bezel covers the cut edge and creates a simple wipeable face.

Interchangeable reflectors tailor beam spread to work stations or corridors.

The sealed lens protects the recessed optical chamber from room contamination.

A remote driver option reduces heat and service depth at the aperture.

고객 제품 관심사

Compact task lighting often leaves an open reflector and rough ceiling cutout exposed to the controlled room.

An open downlight reflector collects dust above the ceiling line.A clear or opal front window seals the complete optical aperture.

A narrow trim does not cover an imperfect ceiling cut.The overlapping sanitary bezel conceals and seals the panel edge.

One fixed beam either over-lights a spot or wastes light outside it.Selectable narrow, medium and wide optics match the local task footprint.

A deep integral driver conflicts with shallow plenum services.The driver can be located remotely with only the compact LED module at the opening.

일반적인 응용 프로그램

Airlock accent lightingEquipment task zonesCleanroom vestibulesLaboratory counters

기술 매개변수

Typical configurable construction ranges for a sealed cleanroom LED downlight are listed below.

핵심 재료	Die-cast aluminum LED module with reflector, sealed polycarbonate lens and formed steel or aluminum trim
패널 두께	60-140 mm recessed body depth
유효 폭	100-220 mm visible trim diameter or width
최대 길이	Up to 250 mm complete recessed housing length
강철 면면 두께	0.8-1.2 mm formed sheet-steel back box where selected
코어 밀도	Approximately 2700 kg/m³ for the aluminum LED heat-sink body
열전도도 (Thermal Conductivity)	160-205 W/(m·K) for the aluminum heat sink
표면 마무리	White powder-coated flush trim with clear, opal or prismatic sealed lens
접합 유형	Overlapping recessed bezel with continuous gasket, spring or screw retention and sealed lens cup
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Round or square apertureNarrow, medium or wide beamFixed or adjustable optical moduleNative amber or red LED

Planning a Cleanroom Downlight specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.